欢迎登录材料期刊网

材料期刊网

高级检索

The objective of the present work is to investigate the effect of various sputtering parameters such as nitrogen flow rate, deposition time and sputtering pressure on structural, wettability and optical properties of titanium oxynitride films deposited on glass substrate by reactive magnetron sputtering. The X-ray diffraction graphs of titanium oxynitride films show evolution of various textures of TiO=N and TiN phases with increasing nitrogen flow rate and deposition time, but an increase in sputtering pressure from 4.0 to 8.0 Pa results in decline of various textures observed for TiO=Ny and TiN phases. The stress and strain calculated by sin2~ method are compressive, which decrease with increasing nitrogen flow rate from 55 to I00 sccm (standard cubic centimeter per minute) and increase with increasing deposition time from 80 to I40 min due to atomic penning effect and increasing thickness of the deposited films. The titanium oxynitride films have contact angle values above 90 deg., indicating that films are hydrophobic. The maximum contact angle of I09.1 deg. is observed at deposition time of 140 min. This water repellent property can add value to potential protective, wear and corrosion resistant application of titanium oxynitride films. The band gap decreases from 1.98 to 1.83 eV as nitrogen flow rate is increased from 55 to 100 sccm; it decreases from 1.93 to 1.79 eV as deposition time is increased from 80 to 140 min as more nitrogen incorporation results in higher negative potential of valence band N2p orbital. But it increases from 2.26 to 2.34 eV for titanium oxynitride films as sputtering pressure increases from 4.0 to 8.0 Pa.

参考文献

[1] W. L. Scopel;M. C. A. Fantini;M. I. Alayo .Local structure and bonds of amorphous silicon oxynitride thin films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(1/2):59-64.
[2] M. Gartner;P. Osiceanu;M. Anastasescu;T. Stoica;T.F. Stoica;C. Trapalis;T. Giannakopoulou;N. Todorova;A. Lagoyannis .Investigation on the nitrogen doping of multilayered, porous TiO_2 thin films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2008(22):8184-8189.
[3] F. Vaz;P. Cerqueira;L. Rebouta;S.M.C. Nascimento;E. Alves;Ph. Goudeau;J.P. Riviere;K. Pischow;J. de Rijk .Structural, optical and mechanical properties of coloured TiN_xO_y thin films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2004(1):449-454.
[4] T. Sasabayashi;N. Ito;E. Nishimura;M. Kon;P.K. Song;K. Utsumi;A. Kaijo;Y. Shigesato .Comparative study on structure and internal stress in tin-doped indium oxide and indium-zinc oxide films deposited by r.f. magnetron sputtering[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2003(2):219-223.
[5] K.G. Grigorov;I.C. Oliveira;H.S. Maciel;M. Massi;M.S. Oliveira, Jr.;J. Amorim;C.A. Cunha .Optical and morphological properties of N-doped TiO_2 thin films[J].Surface Science: A Journal Devoted to the Physics and Chemistry of Interfaces,2011(7/8):775-782.
[6] Y.L. Jeyachandran;Sa.K. Narayandass;D. Mangalaraj .Properties of titanium nitride films prepared by direct current magnetron sputtering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):223-236.
[7] G.B. Smith;A. Ben-David;P.D. Swift .A new type of TiN coating combining broad band visible transparency and solar control[J].Renewable energy,2001(1/3January/March):79-84.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%