由于复合材料在固化过程中产生的残余应力会严重影响材料的使用,并且会带来安全隐患,因此固化残余应力一直都备受关注.首先在研究和测试布拉格光栅温度和应力灵敏度的基础上,将两根光栅分别以平行于碳纤维方向和垂直于碳纤维方向置入铺层的正中间,以此获得复合材料不同方向的残余应力变化情况.监测结果表明,平行方向的光栅在监测固化的过程中受到树脂和纤维的共同作用,且冷却后材料在平行方向显示的残余应力仅有-8.8MPa,而在垂直方向的光栅在监测过程中主要受到树脂的固化影响,收缩应变较大,且冷却后的光栅由于树脂固化不均匀,致使光栅信号分裂为3段.
参考文献
| [1] | 陈绍杰.大型飞机与复合材料[J].航空制造技术,2008(15):32-37. |
| [2] | R. de Oliveira;S. Lavanchy;R. Chatton .Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing[J].Composites. Part A, Applied science and manufacturing,2008(7):1083-1090. |
| [3] | White S R;Hahn H T .Process modeling of composite materials:Residual stress development during cure.Part Ⅰ:Model formulation[J].Journal of Composite Materials,1992,26(16):2402. |
| [4] | V. Antonucci;A. Cusano;M. Giordano .Cure-induced residual strain build-up in a thermoset resin[J].Composites, Part A. Applied science and manufacturing,2006(4):592-601. |
| [5] | Murukeshan VM.;Ong LS.;Seah LK.;Chan PY. .Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors[J].Sensors and Actuators, A. Physical,2000(2):153-161. |
| [6] | Parlevliet, PP;Bersee, HEN;Beukers, A .Measurement of (post-)curing strain development with fibre Bragg gratings[J].Polymer Testing,2010(3):291-301. |
| [7] | 万里冰,武湛君,张博明,王殿富.光纤布拉格光栅监测复合材料固化[J].复合材料学报,2004(03):1-5. |
| [8] | Kersey A D;Dandridge A .Application of fiber-optic sensors[J].IEEE Trans Components Hybrids Manuf Techn,1990,13(01):137. |
| [9] | Philippe A. Olivier .A note upon the development of residual curing strains in carbon/epoxy laminates. Study by thermomechanical analysis[J].Composites, Part A. Applied science and manufacturing,2006(4):602-616. |
| [10] | Crossby P A;Powell G R;Fernado G F et al.A comparative study of optical fiber cure monitoring methods[J].PROCEEDINGS OF THE SPIE,1997,3042:141. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%