用熔铸法制备了Cu-12%Fe合金,研究了经1000℃固溶后不同时效工艺对合金的相组成、显微组织、硬度及电导率的影响.结果表明,550℃时效可细化合金的Fe枝晶.消除Cu基体枝晶偏析并改变晶面间距.合金硬度在时效初期时下降,随后增加并达到最大值后再次下降.在350℃和450℃时效时,电导率随时效时间增加而上升.在550℃和650℃时效时,电导率随时效时间先增加而后下降.对Cu-12%Fe合金固溶并在550℃时效4h,可以获得良好的力学和电学性能匹配.
Cu-12 % Fe alloy was prepared by fusion casting. The phases, microstructure, hardness and conductivity were investigated for the alloy quenched at 1000℃ and aged at different temperatures for different time. The results show that aging treatments at 550℃ after quenching can refine the primary Fe dendrites, remove the dendritic segregation in Cu matrix and change the interplanar spacing of Cu phase in the alloy.Hardness of the alloy decreases firstly and then increases up to a maximm value with the increase in aging time. Conductivity of the alloy inereases with increasing aging time at 350 ～ 450℃. The conductivity firstly increases and then decreases with the increase of aging time at 550 ～650℃. It is suggested that the exeellent mechanieal and electrical properties are obtained for Cu-12%Fe alloy quenched and then aged at 550℃for 4h.
参考文献
| [1] | Hong S I .Yield strength of a heavily drawn Cu-20%Nb filamentary microcomposite[J].Scripta Materialia,1998,39(12):1685-1691. |
| [2] | Krotz P D;Spitzig W A;Laabs FC .High temperature properties of heavily defermed Cu-20%Nb and Cu-20% Ta composites[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1989,110:37-47. |
| [3] | Jin Y;Adachi K;Suzuki H G .Correlation between the cold-working and aging treatments in a Cu-15 Wt Pet Cr in situ composite[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(08):2195-2203. |
| [4] | Biselli C;Morris D G .Microstructure and strength of Ca-Fe in Situ composites after very high drawing strains[J].Aeta Mater,1996,44(02):493-504. |
| [5] | Jerman G A;Anderson I E;Verhoeven J D .Strength and electrical conductivity of deformation processed Cu-15Fe alloys produced by powder metallurgy techniques[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993,24:35-42. |
| [6] | Zhang L;Meng L .Evolution of microstructure and electrical resistivity of Ca-12wt.% Ag filamentary microcomposite with drawing deformation[J].Scripta Materialia,2005,52(12):1187-1191. |
| [7] | LiuJB;Meng L .The characteristics of Cu-12wt% Ag filamentary microcomposite in different isothermal process[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,418(1-2):320-325. |
| [8] | Wu Z W;Liu J J;Mang L .Mierostructure,mechanical properties and electrical conductivity of Cu-12 wt% Fe mierocomposite annealed at different temperatures[J].Journal of Alloys and Compounds,2009,467:213-218. |
| [9] | 姚再起,葛继平,刘书华,李海山,李明生.Cu-11.5%Fe合金的导电性[J].中国有色金属学报,2004(11):1912-1917. |
| [10] | Benghalem A;Morris D G .Mierostructure and strength of wire-drawn Cu-Ag filamentary composites[J].Acta Materialia,1997,45(01):397-3406. |
| [11] | S.I.Hong;M.A.Hill .Microstructural stability and mechanical response of Cu-Ag microcomposite wires[J].Acta materialia,1998(12):4111-4122. |
| [12] | Anderson K R;Groza J R .Mierostructural size effects in high-strength high-conductivity Cu-Cr-Nb alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,32(05):1211-1224. |
| [13] | Morris D G;Morris M A .Mierostrueture and strength of nanocrystalline copper alloy prepared by mechanical alloying[J].Acta Metall Mate,1991,39(08):1763-1770. |
| [14] | S.I. Hong;M.A. Hill .MICROSTRUCTURE AND CONDUCTIVITY OF Cu-Nb MICROCOMPOSITES FABRICATED BY THE BUNDLING AND DRAWING PROCESS[J].Scripta materialia,2001(10):2509-2515. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%