采用扫描电镜结合慢应变拉伸试验研究了表面机械处理(喷砂和砂轮盘打磨)对5083铝合金的表面形貌和拉伸性能的影响.结果表明:5083铝合金经表面机械处理后,出现了一定程度的损伤(表层产生了裂纹),从而使其拉伸时断裂时间缩短和伸长率降低,其中表面喷砂后,伸长率降低了9.9%,表面打磨后,伸长率降低了13.5%.
参考文献
| [1] | Hsin-Hwa Chen;Jian-Yih Wang;Jye Lee .Superplasticity of AA5083 alloy as processed by equal channel angular extrusion[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2008(1/2):305-308. |
| [2] | J. L. Searles;P. I. Gouma;R. G. Buchheit .Stress Corrosion Cracking of Sensitized AA5083 (Al-4.5Mg-1.0Mn)[J].Materials Science Forum,2002(Pt.3):1437-1442. |
| [3] | 赵月红,林乐耘.不同加工及表面处理状态LF6铝镁合金的深海腐蚀行为[[J].中国有色金属学报,2001(z1):27-30. |
| [4] | X. Zhou;G.E. Thompson;G.M. Scamans .The influence of surface treatment on filiform corrosion resistance of painted aluminium alloy sheet[J].Corrosion Science,2003(8):1767-1777. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%