为了探索自润滑陶瓷材料的开发及应用,采用冷压烧结工艺制备Al2O3/TiC/CaF2自润滑复合陶瓷材料.在摩擦磨损实验机上对其进行摩擦磨损实验,并对其摩擦磨损行为及自润滑效应进行分析.结果表明:在实验过程中,Al2O3/TiC/CaF2复合陶瓷材料物理机械性能优于同条件下制备的Al2O3/TiC复合陶瓷材料,且具有较低的摩擦因数和磨损率,其减摩抗磨效果明显,具有一定的自润滑效应,其减摩抗磨机理为摩擦驱动下CaF2存在于摩擦副表面,形成减摩抗磨层,在表面形成一层平整、光滑的自润滑层,增加摩擦表面实际接触面积,起到自润滑效应.
参考文献
| [1] | Longson B .Lubrication of High Temperature Ceramic Materials[J].Tribology International,1983,16(04):221-225. |
| [2] | Yang M S;Liu X B;Fan J W .Microstructure and Wear Behaviors of Lair Clad NiCr/Cr3C2-WS2 High Temperature Self-lubricating Wearresistant Composite Coating[J].Applied Surface Science,2012,258(08):3757-3762. |
| [3] | 刘夏静,丁春华.不同自润滑相尺寸和分布位置对自润滑表面膜形成的影响[J].无机材料学报,2011(01):97-101. |
| [4] | Ouyang J H;Liang X S;Wen J .Electrodeposition and Tribological Properties of Self-lubricating Ni-BaCr2O4 Composite Coatings[J].Wear,271(9-10):2037-2045. |
| [5] | J. V. Pimentel;T. Polcar;M. Evaristo;A. Cavaleiro.Examination of the tribolayer formation of a self-lubricant W-S-C sputtered coating[J].Tribology International,2012:188-193. |
| [6] | 肖汉宁;千田哲也;殷冀湘 .氧化铝陶瓷的高温磨损与自润滑机理研究[J].无机材料学报,1997,12(03):420-424. |
| [7] | Sullivan J L;Shi B G;Saied S O .Microtribological Studies of Two-phase Al2O3-TiC Ceramic at Low Contact Pressure[J].Tribology International,2005,38(11-12):987-994. |
| [8] | N. LIU;M. SHI;Y.D. XU .Effect of starting powders size on the Al_2O_3-TiC composites[J].International Journal of Refractory Metals & Hard Materials,2004(6):265-269. |
| [9] | Yang Xue-feng;Ze Xiang-bo;Wang Hong-yan .Wear properties and microstructures of alumina matrix composite ceramics used for drawing dies[J].CERAMICS INTERNATIONAL,2009(8):3495-3502. |
| [10] | Yang X F;Deng J X;Wang H et al.Wear Behaviors and Lubrication Medium of TiC/Al2O3 Ceramic Wire Drawing Dies[J].Transactions of Nonferrous Metals Society of China,2007,17(01):s663-s666. |
| [11] | Silney H E .Solid Lubricant Materials for High Temperature-a Review[J].Tribology International,1982,15(05):303-315. |
| [12] | Min Hyung Cho;Jeong Ju;Seong Jin Kim;Ho Jang .Tribological properties of solid lubricants (graphite, for automotive brake friction materials[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2006(7/8):855-860. |
| [13] | 梁宏勋,吕晋军,刘维民,薛群基.Y-TZP/MoS2自润滑材料的制备与研究[J].无机材料学报,2004(01):207-213. |
| [14] | Yoshitada Watanabe .High-speed sliding characteristics of Cu-Sn-based composite materials containing lamellar solid lubricants by contact resistance studies[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(7/8):624-631. |
| [15] | 赵海洋,王为民,傅正义,王皓.CaF2烧结助剂对热压烧结AlN-BN陶瓷复合材料的影响[J].无机材料学报,2008(01):99-103. |
| [16] | 黄传兵,杜令忠,张伟刚.NiCr/Cr3C2-BaF2·CaF2高温自润滑耐磨涂层的制备与摩擦磨损特性[J].摩擦学学报,2009(01):68-74. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%