通过掺入不同比例的MgO,采用固相烧结法,制备出一种Pb0.95 Sr0.05(Zr0.525 Ti0.475)O3+1.1 mol% CaFeO5/2+0.3mol% Fe2O3+0.2mol% Li2CO3+xmol% MgO压电陶瓷材料.实验表明:适量MgO掺杂可以改善材料压电介电性能,在保持较高压电性能基本不变的前提下,提高机械品质因数Qm,降低介电损耗tanδ.当x=0.2时,陶瓷的综合性能最佳,具体性能参数为:压电应变常数d33=254 pC/N,平面机电耦合系数Kp=54.5%,相对介电常数εT33/ε0=960,介电损耗tanδ=0.34%,机械品质因子Qm=822.其性能满足大功率压电器件的要求,能较好地应用于压电变压器、超声换能器等器件中.
参考文献
[1] | 姜丹,周桃生,刘珩,尚勋忠,张蕾,何云斌.CeO2掺杂(Ba, Sr,Ca) TiO3 基高压电容陶瓷的研究[J].硅酸盐通报,2010(03):698-700,704. |
[2] | 陆翠敏,徐明霞,孙清池,罗云飞.MnSb含量对PMSZT压电陶瓷性能的影响[J].稀有金属材料与工程,2005(z2):845-848. |
[3] | Hyeong Jae Lee;Seyit O. Ural;Lei Chen .High Power Characteristics of Lead-Free Piezoelectric Ceramics[J].Journal of the American Ceramic Society,2012(11):3383-3386. |
[4] | Zhigang Zhu;Guorong Li;Baoshan Li .The influence of Yb and Nd substituents on high-power piezoelectric properties of PMS-PZT ceramics[J].Ceramics International,2008(8):2067-2072. |
[5] | Yongke Yan;Kyung-Hoon Cho;Shashank Priya .Role of Secondary Phase in High Power Piezoelectric PMN-PZT Ceramics[J].Journal of the American Ceramic Society,2011(12):4138-4141. |
[6] | Yu Cheng;Ying Yang;Yiping Wang;Hanqi Meng .Study on Pb(Mg_(1/3)Ta_(2/3))O_3–Pb(Mn_(1/3)Sb_(2/3))O_3–Pb(Zr_xTi_(1-x))O_3 high power piezoelectric ceramics near the morphotropic phase boundary[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(2):364-369. |
[7] | 陈禧,童幸生,郎静,白华,朱聪旭,杨巍屹,马南钢.MgO-SiO2微量添加剂对高纯Al2O3陶瓷性能的影响[J].硅酸盐通报,2010(06):1299-1302,1312. |
[8] | 黄存兵,魏春兰,卢铁城.非化学配比对Mg_((1-3χ))Al_((2-2χ))O_4 尖晶石透明陶瓷显微结构的影响[J].硅酸盐通报,2010(01):121-125. |
[9] | 卢正东,沈春英,丘泰.(Mg1-xCox)TiO3基微波陶瓷介电性能研究[J].硅酸盐通报,2010(02):284-287. |
[10] | 蒋红霞,周桃生,彭绯,尚勋忠,余祖高.MgO掺杂对PMMN四元系压电陶瓷结构与性能的影响[J].人工晶体学报,2008(02):356-359. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%