欢迎登录材料期刊网

材料期刊网

高级检索

借助扫描电子显微镜研究了原煤及其各种树脂混合物经微型反应釜中350 ℃和400 ℃处理后所获残炭的形貌.结果表明:富氢煤的显微组分被分解,而丝炭和角质等煤的显微组分难分解.添加诸如高密、低密聚丙烯及聚苯乙烯等树脂后可加速煤的显微组分的分解,并改变了其残炭的显微形貌.

Carbonaceous residues obtained by carbonizing virgin and various coal-polymer mixtures in a micro autoclave at temperatures of 350 ℃ and 400 ℃ were investigated by scanning electron microscopy. Results show that hydrogen-rich macerals are disintegrated while other macerals like fusain, and exinite are resistant to disintegration. Addition of polymers like low & high density polypropylene and polystyrene leads to an increased disintegration of the macerals and alters the morphologies of the residues.

参考文献

[1] Fernfindez J J;Figueiras A;Granda M et al.Modification of coal-tar pitch by air-blowing I. Variation of pitch composition and properties[J].Carbon,1995,33(03):295-307.
[2] Fernfindez J J;Figueiras A;Granda M et al.Modification of coal-tar pitch by air-blowing II. Influence on coke structure and properties[J].Carbon,1995,33(09):1235-1245.
[3] Newman J W .Manufactured petroleum pitch a versatile carbon precursor[Z].Light Metals,1980.
[4] Idrus Abdullah .The effect of bulk density of calcined petroleum coke to pre baked anode properties[Z].Dept. of Metallurgy, Fact. of Eng., Univ. of Indonesia,1989.
[5] Knight R A .Final technical report to illinois clean coal institute[R].Carterville IL,1994.
[6] Bushby R S;Scott V D .Evaluation of aluminium-copper reinforced with pitch-based carbon fibres[J].Composites Science and Technology,1997,57:119-128.
[7] Zeng Q .Aluminum based composites reinforced with alumina coated carbon fibers[J].Materials Science and Technology,1998,14:1266-1268.
[8] Marhic C;Lancin M;Vidal M H.Influence of the age hardening of Al alloy matrix on the mechanical behaviour of C/Al composites[A].Canada,1995:551-558.
[9] Cheng H M;Akiyama S;Kithara A et al.Behaviour of carbon fiber reinforced Al-Si composites after thermal exposure[J].Materials Science and Technology,1992,8:275-281.
[10] Vidal-Sétif M H;Rabinovich M;Daux J C.Carbon reinforced metal matrix composites: Problems involved in using industrial aluminium alloys[A].Canada,1995:449-456.
[11] Bushby R S;Scott V D .Evaluation of aluminium-copper reinforced with pitch-based carbon fibres[J].Composites Science and Technology,1997,57:119-128.
[12] Wang J;Hong T;Li G et al.A combined process of coating and hybridizing for the fabrication of carbon fibre reinforced aluminum matrix composites[J].Composites Part A:Applied Science and Manufacturing,1997,28:943-948.
[13] Aidun D;Martin P;Sun J .Fracture and mechanical properties of P100 Gr/6061 Al composite[J].Materials Engineering and Performance,1992,1:463-467.
[14] Rmili M.;Merle P.;Vincent H.;Vincent C.;Massardier V. .MECHANICAL PROPERTIES OF T300/AL COMPOSITES - EMBRITTLEMENT EFFECTS DUE TO A B4C COATING[J].Journal of Materials Science,1996(17):4533-4539.
[15] Long S.;Beffort O. .Influence of microstructure on axial strength of unidirectional continuous fibre reinforced aluminium matrix composites[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2000(7-8):806-810.
[16] Kalback W M;Romine H E;Bourrat X M .Solvated mesophase pitches[P].US:5259947,1993.
[17] Otani S;Watanabe S;Orion H et al.High modulus carbon fibers from pitch materials[J].Bulletin of the Chemical Society of Japan,1972,45:3710.
[18] Singer L S .High modulus, high strength carbon fibers from mesophase pitch[P].US:40051283,1997.
[19] CARROTT P J M;Nabais J M V;Riberio Carott M M L.Scanning electron microscopy of activated carbons prepared from commercial acrylic textile fibers[J].Fuel Processing Technology,2002:1556.
[20] Arshad Hussain Wazir,Lutfullah Kaka Khail,Ghosia Lutfullah,Imtiaz Ahmad.煤焦油沥青制备中间相[J].新型炭材料,2003(04):281-285.
[21] Huttinger K J;Wang J P .Kinetics of mesophase formation in a stirred tank reactor and properties of the products II. Discontinuous reactor[J].Carbon,1992,30(01):1-8.
[22] Brydson P;West wood;Jiang A et al.Carbon based material studied by PEELS[J].INSTITUTE OF PHYSICS CONFERENCE SERIES,1997,153:515-519.
[23] Brydson P;West wood;Jiang A et al.Investigating the distribution and bond of light elements alloyed in carbonaceous materials by PEELS in the Tem/STEM[J].CARBON,1989,36:1139-1148.
[24] Jiang X;Brydson P;Rad B .Characterization of the fiber matrix interfacial structure in carbon fiber reinforced poly carbosilane derived Sic matrix composites using STEM/EELS[J].Journal of Microscopy,1999,196:203-212.
[25] Stach E.Fungal remains of high reflectance[A].,1951:585.
[26] Stach E .The maceral variety fungo-sclerotinite[J].Fortcher Geol Rheindl U Westfalen,1966,13:921.
[27] Benes K .The maceral variety of Resino-sclerotinite[J].Kraussova j sb Geol Ved,Paleontrol,Rada P Svazek,1964,4:65.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%