利用自制的实验装置研究倾斜式冷却剪切流变技术制备半固态AlSi9Mg合金.结果表明:合金熔体在倾斜冷却板表面非均匀形核并受到重力和振动力的剪切作用,初生α(Al)逐渐从枝晶网络演化为细小的球状或粒状晶;控制浇注温度在600℃、倾斜板长度在600 mm、振动频率在50 Hz时可以获得组织良好的半固态合金熔体,合金熔体中初生α(Al)的平均晶粒尺寸为50μm,形状因子为0.71;机械振动能显著细化AlSi9Mg合金组织,随着振动频率的提高,初生α(Al)明显细化,圆整度也随之提高.
参考文献
| [1] | QIU P Q;NOMURA H;TAKITA M .Improvement of microstrueture and tensile properties of cast iron by semi-solid casting[J].Foundry Engineering,1999,71(10):685-690. |
| [2] | PIAO Long-yun;TETSUICHI M .Influence of BN film of inclined cooling plate on solid fraction in semi-solid slurry[J].Journal of the Japan Institute of Metals,2004,68(04):228-231. |
| [3] | FUMI T;TETSUICHI M .Grain refining of semi-solid Cu-Sn alloys castings using an inclined cooling plate[J].Copper and Copper Alloy,2004,43(01):177-182. |
| [4] | TOSHIO H;KAPRANOS P.Thixo-forming process using in got cast by a cooling slope and low super heat casting[A].Tsukuba,2002:795-800. |
| [5] | MOTEGI T.Continuous casting of semisolid Mg-9%Al-1%Zn alloy[A].Tsukuba,2002:831-836. |
| [6] | 管仁国,李罡,李俊鹏,温景林.倾斜式剪切冷却制备1Cr18Ni9Ti不锈钢半固态材料[J].东北大学学报（自然科学版）,2005(09):867-870. |
| [7] | 管仁国,康立文,杜海军,温景林,崔建忠.倾斜式冷却剪切技术制备Al-3%Mg半固态合金坯料[J].中国有色金属学报,2006(05):811-816. |
| [8] | MUUMBO A;NOMURA H.Casting of semi-solid cast iron slurry using combination of cooling slope and pressurization[J].International Journal Cast Metals Research,2004(01):39-46. |
| [9] | TOSHIO H .Semi-solid strip casting using a twin roll casting equipped with a cooling slope[J].Journal of Materials Processing Technology,2002,130(11):558-561. |
| [10] | Fumi Tanabe;Tetsuichi Motegi;Eiji Sugiura .Continuous Casting of Semisolid AC4CH Aluminum Alloy Produced using an Inclined Cooling Plate[J].日本金属学会誌,2003(6):291-294. |
| [11] | 戴安国,邢书明,和优锋.倾斜冷却半固态连铸A356铝合金过程稳定性研究[J].铸造,2006(03):239-241. |
| [12] | KOPP R;SHIMAHARA H.State of R&D and future trends in semi-solid manufacturing[A].Tsukuba,2002:57-56. |
| [13] | 王元庆,樊自田,李继强.消失模铸造AZ91D振动凝固及半固态热处理组织的演变[J].特种铸造及有色合金,2006(08):506-509. |
| [14] | 周尧和;胡壮麒;介万奇.凝固技术[M].北京:机械工业出版社,1998:105-106. |
| [15] | WANG J;HE S X;SUN B D.Grata refinement of Al-Si alloy (A356)by melt thermal treatment[J].Journal of Materials Processing Technology,2003(141):29-34. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%