To further decrease the fuel consumption of blast furnace in Tangshan Guofcng Iron and Steel Co Ltd,measures of improving the quality of sinter and pellet and the performances of raw materials were put forward through phase analysis and physical and chemical performance testing.The measures of increasing the grade of sinter,decreasing the sinter reduction degradation index at low temperature,and increasing the sinter soft melt performance at elevated temperature,as well as the reasonable process parameters of sintering were described in detail.
参考文献
| [1] | ZHANG Yu-zhu;GENG Ming-shan;LI Gang et al.The Influence of the Brazil CVRD and Indian Ores on the Quality of Sinter[J].Journal of Hebei Institute of Technology,2005,27(03):11. |
| [2] | Li-Heng HSIEH .Effect of Raw Material Composition on the Sintering Properties[J].ISIJ International,2005(4):551-559. |
| [3] | LIU Li-na;HAN Xiu-li .A Review on Influence of Sinter Quality[J].Journal of Hebei Institute of Technology,2006,28(02):18. |
| [4] | KE Hai-bin;ZHANG Yu-zhu;LI Chun-zeng et al.Effect of Basieity on Sinter Quality in Shigang[J].China Metallurgy,2007,17(03):21. |
| [5] | Okazaki J;Higuchi K;Hosotani Y et al.Influence of Iron Ore Characteristics on Penetrating Behavior of Melt Into Ore Layer[J].ISIJ International,2003,43(02):1384. |
| [6] | 客海滨,张玉柱,王丽丽,邢宏伟.不同MgO含量对烧结矿质量的影响[J].河南冶金,2007(01):8-10,13. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%