综述了高强高韧损伤容限型钛合金TC21的热加工行为研究进展.重点介绍了热加工及热处理工艺参数对TC21钛合金的相组成、显微组织与力学性能、损伤容限性能等方面的影响.指出TC21钛合金在国内某些领域已经得到了应用,但有待进一步研究与开发.
参考文献
| [1] | 曲恒磊;赵永庆;朱知寿 等.一种高强韧钛合金及其加工方法[P].中国,03105965.1,2003-09-30. |
| [2] | 赵永庆,曲恒磊,冯亮,杨海瑛,李辉,张颖楠,郭红超,黄定坤.高强高韧损伤容限型钛合金TC21研制[J].钛工业进展,2004(01):22-24. |
| [3] | 曲恒磊,陈军,郭红超,周廉,周义刚,赵永庆,曾卫东,冯亮,李辉,张颖楠,俞汉清.强韧钛合金相变温度的确定[C].中国科协第二届优秀博士生学术年会论文集,2004:512-514. |
| [4] | 牛蓉蓉,葛鹏,杨冠军,罗雷.TC21钛合金相变点测定[J].热加工工艺,2010(08):15-16. |
| [5] | Fei, YH;Zhou, L;Qu, HL;Zhao, YQ;Huang, CZ .The phase and microstructure of TC21 alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):166-172. |
| [6] | 党薇,薛祥义,寇宏超,常辉,李金山,张丰收,周廉.TC21钛合金慢速冷却过程中的相组成及组织演化[J].航空材料学报,2010(03):19-23. |
| [7] | 朱知寿,王新南,童路,刘东升.新型TC21钛合金相变行为和相组成研究[J].稀有金属快报,2006(12):23-27. |
| [8] | 刘东升 .高强韧钛合金的热处理工艺及相变行为研究[D].北京:清华大学,2005. |
| [9] | 费玉环,周廉,曲恒磊,赵永庆,冯亮.两相区热处理对TC21钛合金显微结构的影响[J].稀有金属材料与工程,2007(11):1928-1932. |
| [10] | 王义红,寇宏超,朱知寿,李金山.TC21合金时效过程中的相变研究[J].热加工工艺,2010(04):132-135. |
| [11] | Wang Y;Kou H;Chang H et al.Influence of solution temperature on phase transformation of TC21 alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,508(1-2):76. |
| [12] | Luetjering G .Influence of processing on microstructure and mechanical properties of (α + β) titanium alloys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1998,243(1-2):32. |
| [13] | Peters P O;Luetjering D;Koren M et al.Processing,microstructure,and properties of β-CEZ[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1996,213(1-2):71. |
| [14] | Campbell J E;Underwood J H;Gerberich W W.断裂力学在选材方面的应用[M].北京:冶金工业出版社,1992:239. |
| [15] | Sauer C;Luetjering G .Therrno-mechanical processing of high strength β-titanium alloys and effects on microstructure and properties[J].Journal of Materials Processing Technology,2001,117:311. |
| [16] | 马少俊,吴学仁,刘建中,王利发.TC21钛合金的微观组织对力学性能的影响[J].航空材料学报,2006(05):22-25. |
| [17] | 张颖楠,赵永庆,曲恒磊,李辉,冯亮,郭红超,黄定坤.热处理对TC21合金显微组织和室温拉伸性能的影响[J].稀有金属,2004(01):34-38. |
| [18] | 周宇;朱知寿;王新南 等.TC21钛合金锻后热处理工艺与合金组织及力学性能关系[J].稀有金属材料与工程,2008,37(z3):618. |
| [19] | 朱知寿,王新南,童路,刘东升.新型TC21钛合金热处理工艺参数与显微组织演变的关系研究[J].钛工业进展,2006(06):24-27. |
| [20] | Chen J;Zhou Y Q;Zeng W D.Effect of microstructure on impact toughness of TC21 alloy[J].Transactions of Nonferrous Metals Society of China,2007(A1):93. |
| [21] | 张利军,田军强,周中波,寇宏超,朱知寿.热处理制度对TC21钛合金锻件组织及力学性能的影响[J].中国材料进展,2009(09):84-87. |
| [22] | Zhu, Y.;Zeng, W.;Feng, F.;Sun, Y.;Han, Y.;Zhou, Y. .Characterization of hot deformation behavior of as-cast TC21 titanium alloy using processing map[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1757-1763. |
| [23] | Seshacharyulu T;Medeiros S C;Morgan J T et al.Hot deformation and microstructural damage mechanisms in extra-low interstitial (ELI) grad Ti-6Al-4V[J].Materials Science and Engineering,2000,A279:289. |
| [24] | 周军 .Ti-17钛合金片状组织球化规律研究[D].西北工业大学,2005. |
| [25] | 宫旭辉,王宇,夏源明,葛鹏,赵永庆.TC21钛合金的高温动态拉伸力学行为[J].中国有色金属学报,2010(04):647-654. |
| [26] | 李戈岚,刘汉海.耐久性/损伤容限设计简介[J].飞机设计,2004(04):23-32. |
| [27] | Arrieta AJ;Striz AG .Optimal design of aircraft structures with damage tolerance requirements[J].Structural and multidisciplinary optimization,2005(2):155-163. |
| [28] | 曹春晓.选材判据的变化与高损伤容限钛合金的发展[J].金属学报,2002(z1):4-11. |
| [29] | 李辉,曲恒磊,赵永庆,冯亮,曾卫东.片层厚度对损伤容限型TC21合金裂纹扩展速率的影响[J].材料工程,2006(04):21-23. |
| [30] | 王新南,朱知寿,童路,周宇,周晓虎,俞汉清.锻造工艺对TC4-DT和TC21损伤容限型钛合金疲劳裂纹扩展速率的影响[J].稀有金属快报,2008(07):12-16. |
| [31] | 朱丽英,陈明和,陈伟.TC21钛合金的疲劳裂纹扩展研究[J].机械制造与自动化,2009(05):10-11,28. |
| [32] | 赵永翔,杨冰,张卫华.一种疲劳长裂纹扩展率新模型[J].机械工程学报,2006(11):120-124. |
| [33] | 余槐,袁鸿,王金雪,王新南,朱知寿.三重退火对TC21钛合金电子束焊接接头组织性能的影响[J].航天制造技术,2007(02):33-35. |
| [34] | 朱知寿,王新南,童路,商国强.航空用损伤容限型钛合金研究与应用[J].中国材料进展,2010(05):14-17. |
| [35] | Fei, YH;Zhou, L;Qu, HL;Zhao, YQ;Huang, CZ .The phase and microstructure of TC21 alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):166-172. |
| [36] | Zhu Zhishou et al.Quasi-beta forging process for titanium alloys[P].CN,ZL01131237.8,2004-07-28. |
| [37] | Zhu Zhishou et al.Quasi-beta heat treatment for titanium alloys[P].CN,ZL200410090864.3,2008-07-30. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%