等离子涂层孔隙研究进展

材料导报, 2006, 20(7): 16-26.

等离子涂层孔隙研究进展

张红松 ^1, , 王富耻 ^2, , 马壮 ^3, , 王全胜 ^4, , 冼文锋 ^5, , 成志芳 ^6,

1.北京理工大学材料科学与工程学院,北京,100081

2.北京理工大学材料科学与工程学院,北京,100081

3.北京理工大学材料科学与工程学院,北京,100081

4.北京理工大学材料科学与工程学院,北京,100081

5.北京理工大学材料科学与工程学院,北京,100081

6.北京理工大学材料科学与工程学院,北京,100081

关键词：等离子喷涂 , 孔隙率 , 物理性能 , 喷涂工艺

Research Development of Pores in Plasma Sparayed Coatings

总结了等离子涂层孔隙形成原因,孔隙率的测试,孔隙率对涂层弹性模量、热导率、残余应力的影响;介绍了喷涂工艺参数对孔隙率影响及涂层形成过程的数值模拟.目前主要以涂层的孔隙率作为研究重点,但孔隙率仅代表了涂层的密实程度,应进一步研究等离子涂层中孔隙的形状、大小及其对涂层性能的影响以及影响涂层孔隙结构的主要工艺参数.

参考文献

[1]	卢燕平.金属表面防腐蚀处理[M].北京:冶金工业出版社,1993
[2]	王振林;韩永;许晋生.金属热喷涂技术及应用[M].北京:纺织工业出版社,1992
[3]	李其连.等离子喷涂参数对热障涂层热冲击性能的影响[J].航空制造技术,2004(06):81-83,108.
[4]	郑学斌,黄民辉,黄静琪,张叶方,丁传贤.喷涂距离和喷涂功率对羟基磷灰石涂层的影响[J].无机材料学报,1999(05):783-788.
[5]	孙波,李长久,白勇峰.喷涂工艺参数对NICrBSi涂层显微组织和性能的影响[J].材料保护,2001(11):30-31.
[6]	曾毅;张叶方;黄静琪等.[J].山东陶瓷,1998,21(04):16.
[7]	蒋驰,周晋林,张鹏程,肖云峰,税毅,王术刚,刘春荣,刘清和.等离子喷涂参数对钽涂层组织及性能的影响[J].材料保护,2002(08):27-28,31.
[8]	高阳,史雅琴,辛刚,彭存达.等离子喷涂碳化钨涂层组织与喷涂条件的关系[J].机械工程材料,2002(08):25-27,31.
[9]	Chati M K;Paulino G H;Mukherjee S .[J].International Journal for Numerical Methods in Engineering,2001,50:2233.
[10]	孙永兴,王引真,何艳玲.等离子喷涂工艺稳定性对Cr2O3涂层结合强度的影响[J].兵器材料科学与工程,2001(02):38-40.
[11]	Doring J E;Vaben R;Stover D .[J].Journal of Thermal Spray Technology,2003,12:1197.
[12]	李剑锋,黄静琪,季珩,丁传贤.等离子喷涂Cr2O3涂层显微硬度的工艺优化[J].硅酸盐学报,2001(01):49-53.
[13]	Li Changjiu;Sun Bo.[J].THIN SOLID FILMS,2004(450):282.
[14]	Ozkan Sarikaya .[J].Surface and Coatings Technology,2005,190:388.
[15]	Ozkan Sarikaya .[J].Materials & Design,2005,26:53.
[16]	Castro R G;Bartlett A H;Hollis K J .[J].Fusion Engineering and Design,1997,37:243.
[17]	Fleury E.;Kim WT.;Kim DH.;Lee SM. .Effects of air plasma spraying parameters on the Al-Cu-Fe quasicrystalline coating layer[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2000(1/3):194-204.
[18]	Montavon G;Sampath S;Berndt C C et al.[J].Surface and Coatings Technology,1997,91:107.
[19]	AnandKulikarni et al.[J].Materials Science and Engineering,2003,A359:100.
[20]	Cheang P;Khor K A .[J].Journal of Materials Processing Technology,1995,48:429.
[21]	Martin Friis.[J].Surface and Coatings Technology,2001(141):115.
[22]	Cirolini S.[J].Surface and Coatings Technology,1991(48):137.
[23]	Chen Yanxiang;Wang Guilan;Zhang Haiou .[J].Thin Solid Films,2001,390:13.
[24]	吴新灿,陈熙.等离子体喷涂中涂层形成的模拟[J].清华大学学报(自然科学版),2003(11):1503-1506.
[25]	Mostaghimi I;Chandra S;Ghafouri-Azar R .[J].Surface and Coatings Technology,2003,80(01)
[26]	Bengtsson P;Jonannesson T;Wigren J.[A].High Temperature Society of Japan,Osaka,Japan,1995:483.
[27]	Kuroda S.[A].,1998:228.
[28]	Mailhot K;Citzhofer F;Boulos M I.[A].,1998:380.
[29]	李剑锋 .[D].上海:中国科学院上海硅酸盐研究所,2001.
[30]	Diaz P et al.[J].Surface and Coatings Technology,1996,82:284.
[31]	Guy Antou;Ghislain Montavon;Francoise .[J].Surface and Coatings Technology,2004,81:627.
[32]	Khor KA.;Dong ZL.;Gu YW. .Mechanical behavior of plasma sprayed functionally graded YSZ/NiCoCrAlY composite coatings[J].Surface & Coatings Technology,2001(2/3):200-206.
[33]	向兴华 .等离子喷涂ZrO<,2>-NiCoCrAlY梯度涂层的组织与热稳定性[D].哈尔滨工业大学,1997.
[34]	Ilavsky J.;Long GG.;Herman H.;Berndt CC.;Allen AJ. .CHARACTERIZATION OF THE CLOSED POROSITY IN PLASMA-SPRAYED ALUMINA[J].Journal of Materials Science,1997(13):3407-3410.
[35]	IIavsky J et al.[J].Journal of Thermal Spray Technology,1999,8(03):414.
[36]	Wang Z et al.[J].Herman Acta Mater,2003,51:5319.
[37]	Erdal Celik .[J].Ozkan Sarikaya Mater Sci Eng,2004,A379(11)
[38]	SANG-HA LEIGH;CHRISTOPHER C. BERNDT .MODELLING OF ELASTIC CONSTANTS OF PLASMA SPRAY DEPOSITS WITH ELLIPSOID-SHAPED VOIDS[J].Acta materialia,1999(5):1575-1586.
[39]	Sevostianov I;Kachanov M .[J].Acta Materialia,2000,48:1361.
[40]	Allen A.[J].ACTA MATERIALIA,2001(49):1661.
[41]	Vasco Teixeira .[J].Surface and Coatings Technology,2001,146-147:79.
[42]	Ahmet Polat et al.[J].Materials & Design,2002,23:641.
[43]	Schwingel D et al.[J].Surface and Coatings Technology,1998,108:99.
[44]	Neuer G;Steffens H D;Brandl W et al.[J].ACTA MATERIALIA,1991,23(02):108.
[45]	Masaru Nakamichi;Takeshi Takabatake;Hiroshi .[J].Fusion Engineering and Design,1998,41:143.
[46]	Cernuschi F;Binchi P;Lenoi M .[J].Journal of Thermal Spray Technology,1999,8(01):102.
[47]	Cernuschi F;Ahmaniemi S;Vuorist P .[J].Journal of the European Ceramic Society,2004,24:2657.
[48]	沈金文,吕广庶,马壮,王全胜.在热震试验中热障涂层的裂纹形成和扩展[J].新技术新工艺,2002(04):39-41.
[49]	陈方明;李勇.[J].材料与表面处理,2004(03):40.
[50]	Ihgchuan J;Zhongda Yin;Lai Zhonghong .[J].Transactions of Nonferrous Metals Society of China,1996,6(04):94.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

等离子涂层孔隙研究进展

Research Development of Pores in Plasma Sparayed Coatings

参考文献