引入微晶碳与Mg、Ni等金属复合,制备了70Mg30C4Ni复合储氢材料,其储氢密度在4.56%(质量分数)以上,放氢量为4.50%(质量分数),放氢时间为8min.260℃恒温放氢在65min内可释放出77%的氢气,说明Ni对镁碳复合储氢材料放氢性能具有较好的催化作用.通过计算,其平均纳米晶粒度为27.6nm.
参考文献
| [1] | 陈长聘.氢能未来与储氢金属材料技术[J].氯碱工业,2003(05):1-3. |
| [2] | 李法兵,蒋利军,詹锋,郑强,李谦,王树茂.机械合金化直接合成镁基复合储氢材料研究[J].稀有金属材料与工程,2005(05):750-753. |
| [3] | 许炜,陶占良,陈军.储氢研究进展[J].化学进展,2006(02):200-210. |
| [4] | 李谦,蒋利军,林勤,周国治,詹锋,郑强,尉秀英.机械合金化La-Mg-Ni系三元储氢合金的性能[J].稀有金属材料与工程,2004(09):941-944. |
| [5] | 赵国亮,张文丛,房文斌,王尔德.镁基储氢复合材料放氢过程相转变速率研究[J].粉末冶金技术,2005(01):32-35. |
| [6] | 于振兴,孙宏飞,王尔德,梁吉,房文斌.添加碳纳米管镁基材料的储氢性能[J].中国有色金属学报,2005(06):876-881. |
| [7] | Wu C Z;Wang P;Yao X et al.Hydrogen storage properties of MgH2/SWNT composite prepared by ball milling[J].Journal of Alloys and Compounds,2006,420:278. |
| [8] | Vijay R;Sundaresan R .Hydrogen storage properties of Mg-Cr2O3 nanocomposites:The role of catalyst distribution and grain size[J].Journal of Alloys and Compounds,2006,424:289. |
| [9] | Zhang H F;Wang A M .Preparation and hydriding dehydriding properties of mechanically milled Mg-30wt%TiMn1.5 composite[J].Journal of Alloys and Compounds,2003,354:296. |
| [10] | Isobe, S;Ichikawa, T;Gottwald, JI;Gomibuchi, E;Fujii, H .Catalytic effect of 3d transition metals on hydrogen storage properties in mechanically milled graphite[J].The journal of physics and chemistry of solids,2004(2/3):535-539. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%