在声光调Q二级管泵浦固体光源Nd∶YAG激光器基础上,采用“单脉冲同点间隔多次”激光微加工工艺,对45#钢试样表面进行激光微织构加工.分析了离焦量、泵浦电流、重复频率及重复次数对微织构形貌的影响规律.工艺试验表明,微凹腔的直径和深度随着泵浦电流的增大而增大,随着重复频率的增加呈减小的趋势,微凹腔深度随脉冲次数的增加呈近似线性增加,而微凹腔直径呈缓慢减小趋势.通过对某型号四缸汽油机的台架性能试验研究,表明与传统平顶机械珩磨相比,采用激光珩磨技术的汽油机机油耗要比原机降低56％,燃油耗降低1.94％ ～4.5％.
参考文献
| [1] | ETSION I .State of the Art in Laser Surface Texturing[J].ASME Journal of Tribology,2005,127:248-252. |
| [2] | R. Golloch;G. P. Merker;U. Kessen;S. Brinkmann .Functional Properties of Microstructured Cylinder Liner Surfaces for Internal Combustion Engines[J].Tribotest: Tribology & lubrication in practice,2005(4):307-324. |
| [3] | Kligerman Y;Etsion I;Shinkarenko A .Improving tribological performance of piston rings by partial surface texturing[J].Journal of Tribology,2005(3):632-638. |
| [4] | GERBIG Y;DUMITRU G;ROMANO.Effects of laser Texturing on Technical Surfaces[A].Characterization and Applications,2003:45-60. |
| [5] | Johan Meijer .Laser beam machining (LBM), state of the art and new opportunities[J].Journal of Materials Processing Technology,2004(1/3):2-17. |
| [6] | L. M. Vilhena;M. Sedlacek;B. Podgornik;J. Vizintin;A. Babnik;J. Mozina .Surface texturing by pulsed Nd:YAG laser[J].Tribology International,2009(10):1496-1504. |
| [7] | KLINK U.New Technologies of Honing[A].Atlanta,Georgia,1998 |
| [8] | RAMOS J A;ESTRELA R;PITARCH L V.Laser Micromachining of Metals[A].,1999 |
| [9] | CHEN K;YAO Y L .Process Optimization in Pulsed Laser Micromachining with Applications in Medical Device Manufacturing[J].Advanced Manufacturing Technology,2000,16:243-249. |
| [10] | 刘志勇,罗柏文,夏毅敏,王克智,王韬,荀洪菲.钛合金表面织构的光纤激光加工多参数耦合研究[J].湖南科技大学学报（自然科学版）,2011(03):36-38. |
| [11] | 符永宏,华希俊,陶根宁,严必峰,袁润.摩擦副表面激光微造型工艺试验研究[J].应用激光,2006(05):295-298. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%