本文综合运用体式激光粒子图像测速技术和油流显示技术研究了近失速状态下压气机静子通道内部的复杂三维流动,建立了静叶通道内部三维流动结构模型,并分析了典型流动结构的产生、发展和演化机制.实验结果表明,在近失速状态,近叶通道出现了两个截然不同的分离区-吸力面近机匣角区分离(7%~50%弦长,闭式分离)和吸力面近轮毂角区分离(50%弦长以后,开式分离),以及一些复杂的流向旋涡流动结构.
参考文献
[1] | Semiu A. Gbadebo;Nicholas A. Cumpsty;Tom P. Hynes .Three-Dimensional Separations in Axial Compressors[J].Journal of turbomachinery,2005(2):331-339. |
[2] | Lei VM;Spakovszky ZS;Greitzer EM .A Criterion for Ax-ial Compressor Hub-Corner Stall[ASME GT2006-91332][R].,2006. |
[3] | Yu Xianjun;Liu Baojie;Jiang Haokang .Characteristics of the Tip Leakage Vortex in a Low-Speed Axial Compressor[J].AIAA journal,2007(4):870-878. |
[4] | Yu XJ;Liu BH .Stereoscopic PIV measurement of unsteady flows in an axial compressor stage[J].Experimental Thermal and Fluid Science: International Journal of Experimental Heat Transfer, Thermodynamics, and Fluid Mechanics,2007(8):1049-1060. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%