采用SEM、EPMA及拉伸试验等手段研究了影响低C高Si高Mn合金表面氧化皮机械剥壳性能的因素,并测试了自然放置对氧化皮机械剥壳性能的影响.结果表明,氧化皮/基体界面的粗糙度大及富Si层与基体结合紧密是导致该合金表面氧化皮难脱落的主要原因.Si元素在界面处的聚集导致热轧后的盘条表面不均匀氧化,从而加大了界面的粗糙度.自然放置可促使表面氧化皮包括富Si层的碎化、剥离,有利于改善盘条氧化皮的机械剥壳性能.
参考文献
| [1] | 巩党国 .高碳钢盘条表面氧化皮的形成规律及机械剥离性能研究[D].东南大学,2008. |
| [2] | 段建华;董昌华.无酸洗拉丝技术[J].金属制品,2000(1):8-10,24. |
| [3] | 程时;任勇;陈革;邹晖;范敬国;沈金龙.高碳钢盘条表面氧化铁皮机械剥离性实验研究[J].上海金属,2014(2):31-34,39. |
| [4] | D. Geneve;D. Rouxel;P. Pigeat;B. Weber;M. Confente.Surface Composition Modification Of High-carbon Low-alloy Steels Oxidized At High Temperature In Air[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,200817(17):5348-5358. |
| [5] | Kiyoshi KUSABIRAKI;Ryoko WATANABE;Tomoharu IKEHATA.high-temperature Oxidation Behavior and Scale Morphology of Si-containing Steels[J].ISIJ International,20079(9):1329-1334. |
| [6] | 周铖;李平;麻晗.低C高Si高Mn合金高温氧化动力学及形貌特征分析[J].金属热处理,2012(7):73-78. |
| [7] | D. Geneve;D. Rouxel;B. Weber.Segregation across the metal/oxide interface occurring during oxidation at high temperatures of diluted iron based alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20060(0):1-11. |
| [8] | Bryan A. WEBLER;Seetharaman SRIDHAR.The Effect of Silicon on the High Temperature Oxidation Behavior of Low-carbon Steels Containing the Residual Elements Copper and Nickel[J].ISIJ International,20079(9):1245-1254. |
| [9] | 于洋;唐帅;郭晓波;关菊;王国栋;刘玠.热轧卷板氧化铁皮形成机理及控制策略的研究[J].钢铁,2006(11):50-52. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%