Investigation by using LAS 3000 surface analysis system showed that the oxide of Fe, Cr,Al formed during oxidation were Cr_2O_3,Fe_2O_3 and Al_2O_3,but only small amount of nickel oxide was found. The composition of oxide layers for different oxidation durations varied in a similar way. In all cases,there exists an oxygen concentration peak in the composition profile of oxide layer. There is a transitional zone between oxide layer and alloy film.The thickness of oxide layer increases logarithmically with the time of oxida- tion.The ion plated Ni-Cr alloy film has very dense oxide layer and good oxidation resistance.
参考文献
| [1] |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%