将泡沫填充圆管的平均压溃载荷视为圆管、泡沫及圆管与泡沫相互作用三部分之和,基于作者提出的直链塑性铰改进模型,研究了两种泡沫变形模式对泡沫填充圆管准静态压溃行为的影响,得到了新的最优屈曲半波长和平均压溃载荷的理论计算公式,并研究了两种泡沫变形模式下,偏心率和塑性角参数对最优屈曲半波长和平均压溃载荷的影响。结果表明,泡沫变形模式Ⅰ下的平均压溃载荷略高于泡沫变形模式Ⅱ下的相应值,泡沫变形模式对最优屈曲半波长影响较大;与文献[14]相比,所得平均压溃载荷理论预测值与试验结果吻合得更好。
Based on the improved straight chain plastic hinge model proposed by authors recently,the effects of two foam deformation modes on the compressive properties of foam-filled circular tubes were investigated.Considering the average crushing forces as the sum of average force of non-filled column,uniaxial resistance of foam,and the interaction between tube and foam,the analytical expressions of the optimal buckling half-wavelength and the average crushing force were obtained.The results show that the average crushing force under the foam deformation mode Ⅰ is a little higher than that of under the foam deformation mode Ⅱ,and the foam deformation modes greatly affect the optimal buckling half-wavelength.Compared with reference ,the theoretical predictions of average crushing forces derived in this paper agree better with the experimental results.
参考文献
| [1] | 彭兴林, 徐元铭, 梁东平. 填充吸波泡沫的碳纤维复合材料格栅结构吸波性能计算 [J]. 复合材料学报, 2009, 26(3): 162-168. |
| [2] | Reid S R, Reddy T Y, Gray M D. Static and dynamic axial crushing of foam-filled sheet metal tubes [J]. International Journal of Mechanical Sciences, 1986, 28(5): 295-322. |
| [3] | Abramowicz W, Wierzbicki T. Axial crushing of foam-filled columns [J]. International Journal of Mechanical Sciences, 1988, 30(3/4): 263-271. |
| [4] | Wierzbicki T, Bhat S U, Abramowicz W, et al. Alexander revisited-A two folding elements model of progressive crushing of tubes [J]. International Journal of Solids and Structures, 1992, 29(24): 3269-3288. |
| [5] | Hanssen A G, Langseth M, Hopperstad O S. Static and dynamic crushing of circular aluminium tubes with aluminium foam filler [J]. International Journal of Impact Engineering, 2000, 24(5): 475-507. |
| [6] | 桂良进, 范子杰, 王青春. 泡沫填充圆管的轴向压缩能量吸收特性[J]. 清华大学学报: 自然科学版, 2003, 43(11): 1526-1529. |
| [7] | 桂良进, 范子杰, 王青春. 泡沫填充圆管的动态轴向压缩吸能特性[J]. 清华大学学报: 自然科学版, 2004, 44(5): 709-712. |
| [8] | 宋宏伟, 杜星文, 范子杰. 偏心率效应对金属圆柱管轴压性能的影响[J]. 力学与实践, 2004, 26(6): 22-25. |
| [9] | 杜星文, 宋宏伟. 圆柱壳冲击动力学及耐撞性设计[M]. 北京: 科学出版社, 2004. |
| [10] | Kavi H, Toksoy A K, Guden M. Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient [J]. Materials & Design, 2006, 27(4): 263-269. |
| [11] | 吴刚, 吕志强, 何世平, 赵应龙. 轴向冲击作用下泡沫铝填充圆管吸能特性研究[J]. 噪声与振动控制, 2008, 28(6): 161-164, 170. |
| [12] | Norman J. Energy-absorbing effectiveness factor [J]. International Journal of Impact Engineering, 2010, 37(6): 754-765. |
| [13] | Zhang Zonghua, Liu Shutian, Tang Zhiliang. Sandwich cylindrical column under axial crushing loads [J]. Thin-Walled Structures, 2010, 48(1): 9-18. |
| [14] | 卢子兴, 赵亚斌, 陈伟, 等. 金属泡沫填充薄壁圆管的轴压载荷-位移关系 [J]. 力学学报, 2010, 42(6): 1211-1218. |
| [15] | Song Hongwei, Fan Zijie, Yu Gang, et al. Partition energy absorption of axially crushed aluminum foam-filled hat sections [J]. International Journal of Solids and Structures, 2005, 42(10): 2575-2600. |
| [16] | Alexander J M. An approximate analysis of the collapse of thin cylindrical shells under axial loading [J]. Quart J Mech Appl Math, 1960, 13(1): 10-15. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%