According to turbulent theory and characteristics of beam blank continuous casting, 3-Dmodel to represent the flow of beam blank mould is established. The predicted results indicate that the exit obliquity of up 15°(+15°) should be adopted, which will benefit the floatation of non-metallic inclusion and purification of the molten steel. When the nozzle angle is 120°, the flow pattern is reasonable. Proper nozzle depth can be 200mm. Turbulent kinetic of meniscus can be reduced by adopting the square nozzle and suitable area of side outlet when casting speed increases. The results are consistent with those of water model experiment, so the model is exact and reasonable. The model can provide important information for design of SEN and defining of immersion depth.
参考文献
| [1] | B G Thomas;L J Mika;F M Najjar .[J].Metallurgical and Materials Transactions,1990,21B:387. |
| [2] | X Huang;B G Thomas;F M Najjar .[J].Metallurgical and Materials Transactions,1992,23B:339. |
| [3] | X Huang;B G Thomas .[J].Metallurgical and Materials Transactions,1993,24B:379. |
| [4] | 包燕平,张涛,蒋伟,徐保美.板坯连铸结晶器内钢液流场的三维数学模型[J].北京科技大学学报,2001(02):106-110. |
| [5] | 马范军,文光华,李刚.板坯连铸结晶器内钢液流动数值模拟[J].金属学报,2000(04):399-402. |
| [6] | 杨建伟,杜艳平,崔小朝,史荣,刘才.异形坯连铸过程流场与温度场耦合三维数值模拟[J].金属学报,2001(07):767-771. |
| [7] | M Y Zhu;Z Q Xiao.Maths-Physics Simulation of Steel Refining[M].北京:冶金工业出版社,1998:67. |
| [8] | B E Launder;D B Spslding .[J].Computer Methods in Applied Mechanics and Engineering,1997,4(03):269. |
| [9] | S V Patankar.Numerical Heat Transfer and Fluid Flow[M].New York: Hemisphere Pub. Corp,1980:22. |
| [10] | C Shen;L Zhou .[J].炼钢,2000,16(01):30. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%