The optimal parameters for flow grooves and supply grooves were determined by a series of experiments , and the influences of various molding conditions on the mold filling process were analyzed. Furthermore ,the whole VIMP procedure based on grooves was introduced in detail taking the manufacture of a sandwich panel as an example.
参考文献
| [1] | Elias J Rigas;Shawn M Walsh;William A Spurgeon.Development of a Novel Processing Technique for Vacuum Assisted Resin Transfer Molding (VARTM)[J].SAMPLE,2001:1086. |
| [2] | Jun Ni;Shoujie Li;Xiudong Sun;L James Lee .Mold Filling Analysis in Vacuum-Assisted Resin Transfer Molding[J].Polymer Composites,1998,19(06):818-829. |
| [3] | ZHU Ying-dan,WANG Ji-hui,YANG Zui,TAN Hua.Vacuum Infusion Molding Process Part 1: VIMP Based on a High-Permeable Medium[J].武汉理工大学学报(材料科学版)英,2003(03):72-75. |
| [4] | 李新华,祝颖丹,王继辉,高国强.VIMP成型工艺用不饱和聚酯树脂的研究[J].武汉理工大学学报,2002(08):1-4. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%