采用钨极氩孤弧焊(TIG)对Cr含量为1wt% ～5 wt%的低合金耐蚀管线钢进行焊接,研究Cr含量对焊接接头组织和力学性能的影响.结果表明,随着低合金耐蚀管线钢中Cr含量提高,粗晶热影响区晶粒尺寸变大,熔合区组织不均匀,易出现淬硬组织.随Cr含量提高,焊接接头的硬度呈上升趋势,冲击韧性呈下降趋势,尤其当Cr含量达5wt%时,硬度的提高和冲击韧性的下降尤为明显.低合金耐蚀管线钢的Cr含量不超过3wt%时,可得到硬度适中、韧性较高的焊接接头.
Low alloy corroaion resistant pipeline steels containing 1wt% ～ 5wt% Cr were welded by tungsten inert gas welding (TIG) , and the effect of Cr content on microstructure and mechanical properties of the weld joints were investigated.The results show that, with Cr content increasing.grain size of heat-affected zone with coarse grain increases, inhomogeneous microstructure is observed in fusion zone,and hardened phases tend to be present in the weld joint.With Cr content increasing hardness of the weld joint increases and its impact toughness decreases, especially when Cr content is up to 5 wt% .The weld joints with proper hardness and higher toughnesa can be obtained when the Cr content of low alloy corrosion resistant pipeline steel is no more than 3 wt% .
参考文献
| [1] | Muraki T;Nose K;Asehi H.Development of 3% chromium pipeline steel[A].Houston USA,2003 |
| [2] | 张忠铧,黄子阳,孙元宁,蔡海燕,郭金宝.3Cr抗CO2和H2S腐蚀系列油套管开发[J].宝钢技术,2006(03):5-8,59. |
| [3] | Pigliacampo L;Gonrales J C;Tnrconi G L.Window of application an operational track of low carbon 3 Cr steel tubular[A].Houston USA,2006 |
| [4] | 孙建波,柳伟,常炜,张忠铧,李忠涛,于湉,路民旭.低铬X65管线钢CO2腐蚀产物膜的特征及形成机制[J].金属学报,2009(01):84-90. |
| [5] | 曹良裕,魏战江.钢的碳当量公式及其在焊接中的应用[J].材料开发与应用,1999(01):39-43. |
| [6] | Kermani M B;Gonzales J C;Linne C.Development of low carbon Cr-Mo steels with exceptional corrosion resistance for oilfield applications[A].Houston USA,2001 |
| [7] | 刘云旭.金属热处理原理[M].北京:机械工业出版社,1981:140-141. |
| [8] | 尹士科.焊接材料实用基础知识[M].北京:化学工业出版社,2004:28-31. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%