结合宽板坯连铸结晶器的4种断面尺寸,采用1:1水模型进行试验,研究了浸入式水口吹气量、水口浸入深度、水口吐出孔数、水口底部形状、拉速和结晶器断面宽度等工艺参数对结晶器内流体流动行为的影响情况,观察到结晶器内水口周围有旋涡卷渣和液面扰动卷渣,断面1/4区域是液面扰动卷渣,窄面区域有"类旋涡"卷渣和剪切卷渣.结果表明,结晶器内的卷渣与各种工艺参数是相关的,对工艺参数进行优化,就可减少卷渣的发生.
参考文献
| [1] | Iguchi M.;Yoshida J. .Model Study on the Entrapment of Mold Powder into Molten Steel[J].ISIJ International,2000(7):685-691. |
| [2] | Emling W H;Waugaman T A.Subsurface Mold Slag Entrapment in Ultra Low Carbon Steels[A].USA:ISS-AIME,1994:371-379. |
| [3] | Qinglin He .Observation of Vortex Formation in the Mold of a Continuous Slab Caster[J].ISIJ International,1993,33(02):343-345. |
| [4] | Herbertson J;He Q L.Modelling of Metal Delivery to Continuous Casting Moulds[A].USA:ISS-AIME,1991:171-185. |
| [5] | Ferrettietal A.Submerged Nozzle Optimization to Improve Stainless Steel Surface Quality at TERNT Steelworks[A].USA:ISS-AIME,1985:49-57. |
| [6] | Bessho N;Yoda R;Yamasaki H et al.Numerical Analysis of Fluid Flow in Continuous Casting Mold by Bubble Dispersion Model[J].ISIJ International,1991,31(01):40-45. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%