运用高速数码摄像系统对比转速为700的轴流泵在最优工况流量下不同空化程度时的叶顶间隙内空化流动进行拍摄实验，捕捉到空化发生位置和空泡团形态随空化程度变化的演变过程。实验结果表明：叶顶间隙内空化发生的初始位置位于叶顶翼型头部，空泡团为沿叶片工作面向背面旋转的旋涡空化，旋转轴和圆周方向基本一致；随着泵汽蚀余量的降低，空化发生位置和空泡团与叶顶翼型粘连的区域均呈由叶顶翼型头部向尾部延伸发展的趋势；当泵发生汽蚀时，空化发生位置覆盖整个叶顶翼型，间隙空泡团和叶片背面空泡团相掺混，对叶轮流道内液相主流产生强烈干扰，导致泵能量性能急剧下降。研究结果为轴流泵叶顶间隙内空化发生及发展过程的理论研究提供了有效参考。
With the change of NPSH, the cavitating flow in tip clearance of axial-flow pump with specific speed of 700 at the flow rate of best efficiency point were shot by the high speed digital camera. The evolution of cavitation region and the form of cavitation bubbles cluster were tracked. The experimental results show that the initial cavitation region is located in the leading edge of tip airfoil. The type of cavitation is vortex cavitation rotating from blade pressure surface to suction surface, its rotation axis direction is the same as circumferential direction. With the decrease of NPSH, the cavitation region at the tip airfoil moves gradually from the leading edge to the trailing edge and the adhesion between the cavitaion bubbles and the tip airfoil indicates the same moving trend. As the pump being cavitation, the cavitation region at the tip airfoil covers the whole airfoil and the admixture of cavitation bubbles emerging at the tip airfoil and the blade suction surface disturbs the main flow in the impeller channel and deteriorates the pump performance rapidly. The experimental results provide an effective reference for the cavitation region and development process in tip clearance of axial-flow pump.
参考文献
| [1] | 杨策,马朝臣,王延生,老大中.透平机械叶尖间隙流场研究的进展[J].力学进展,2001(01):70-83. |
| [2] | M. Furukawa;K. Saiki;K. Nagayoshi;M. Kuroumaru;M. Inoue .Effects of stream surface inclination on tip leakage flow fields in compressor rotors[J].Journal of turbomachinery,1998(4):683-694. |
| [3] | M. Hoeger;G. Fritsch;D. Bauer .Numerical simulation of the shock-tip leakage vortex interaction in a HPC front stage[J].Journal of turbomachinery,1999(3):456-468. |
| [4] | 李杨,欧阳华,杜朝辉.周向弯曲低压轴流风机叶顶泄漏流动数值研究[J].工程热物理学报,2005(02):240-242. |
| [5] | 杨昌明,陈次昌,王金诺,宋文武,夏鹏飞.轴流泵端壁间隙流动特性的数值研究[J].机械工程学报,2003(09):49-51. |
| [6] | 梁开洪,张克危,许丽.轴流泵叶顶间隙流动的计算流体动力分析[J].华中科技大学学报(自然科学版),2004(09):36-38. |
| [7] | 汤方平,王国强,刘超,周济人,成立.高比转数轴流泵水力模型设计与紊流数值分析[J].机械工程学报,2005(01):119-123. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%