采用UMT-2多功能摩擦实验机,研究了温度对Al2O3/ZrB2/ZrO2复合刀具材料摩擦磨损性能的影响,并分别使用白光干涉仪和扫描电镜分析实验后磨痕的轮廓和微观形貌。结果表明,常温摩擦时,随着ZrB2/ZrO2含量的增加,AZ系列自润滑陶瓷材料与硬质合金对摩时的摩擦系数逐渐降低。高温摩擦时,随着环境温度的提高,表面摩擦温度不断上升,生成的润滑膜有助于使摩擦系数和磨损率下降。
Effect of temperature on friction and wear performance of Al2O3/ZrB2/ZrO2 composite materials was investigated on a UMT-2 multi-function friction tester. White light interferometer and scanning electronic mi- croscope were adopted to observe the profile and micro-morphology of the worn surface of specimens. The re- sults showed that. in the room temperature friction test, the increasing of the ZrB2/ZrO2 volume content can decrease the friction coefficient of AZ series composites; in the high temperature friction test, the surface tem- perature increased as the environmental temperature rise, the generated lubricating film can decrease the friction coefficient and wear rate of the composites.
参考文献
| [1] | Wang Ruigang;Pan Wei;Chen Jian et al.Microstruc ture and mechanical properties of machinable AlzO:/La PO4 composites by hot pressing[J].Ceramics Interna tional,2003,29(01):83-89. |
| [2] | Deng Jianxin;Cao Tongkun;Liu Lili .Self-lubricating be- haviors of AIzO3/TiB2 ceramic tools in dry high-speed machining of hardened steel[J].Journal of the European Ceramic Society,2005,25(07):1073-1079. |
| [3] | Vikas Somani;Samar Jyoti Kalita .Synthesis, Densification, and Phase Evolution Studies of Al_2O_3-Al_2TiO_5-TiO_2 Nanocomposites and Measurement of Their Electrical Properties[J].Journal of the American Ceramic Society,2007(8):2372-2378. |
| [4] | Liu Changxia;Zhang Jianhua;Sun Junlong et al.Addi- tion of AI-Ti-C master alloys and diopside to improve the performance of alumina matrix ceramic materials[J].Ce- ramics International,2007,33(07):1149-1154. |
| [5] | Mishra S K;Das S K;Sherbacov V .Fabrication of A12O:3ZrB2 in situ composite by SHS dynamic compac- tion:a novel approach[J].Composites Science and Tech- nology,2007,67(11-12):2447-2453. |
| [6] | Deng Jianxin;Ai Xing;Li Zhaoqian .Friction and wear behavior of AI203/TiB2 composite against cemented car- bide in various atmospheres at elevated temperature[J].Wear,1996,195(1-2):128-132. |
| [7] | Monteverde F;Bellosi A;Guicciardi S .Processing and properties of zirconium diboride-based eomposites[J].Journal of the European Ceramic Society,2002,22(03):279-288. |
| [8] | Taek-Soo Kim;Takashi Goto;Byong-Taek Lee .Microstructure Control and Mechanical Properties of Fibrous Al_2O_3/ZrO_2 Composites Fabricated by Extrusion Process[J].Scripta materialia,2005(8):725-729. |
| [9] | Han J K;Saito F;Lee B T .Microstructures of porous AlzO2-50wt% ZrO2 composites using in-situ synthesized Al2O3-ZrO2 composite powders[J].Materials Letters,2004,58(16):2181-2185. |
| [10] | Liu Changxia;Zhang Jianhua;Zhang Xihua et al.Ad- dition of AI-Ti-C master alloys and ZrOz to improve the performance of alumina matrix ceramic material[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,426(1-2):31-35. |
| [11] | 胡小平,时存,张厚安,黄之初.温度对MoSi2/SiC配对副高温摩擦磨损性能的影响[J].功能材料,2008(09):1470-1472. |
| [12] | 李彬,邓建新.烧结工艺对Al2O3/ZrB2材料性能的影响[J].武汉理工大学学报,2009(12):26-29. |
| [13] | M. H. Cho;K. H. Cho;S. J. Kim;D. H. Kim;H. Jang .The role of transfer layers on friction characteristics in the sliding interface between friction materials against gray iron brake disks[J].Tribology letters,2005(2):101-108. |
| [14] | Riu D H;Kong Y M;Kim H E .Effect of Cr203 addi-tion on microstructural evolution and mechanical proper- ties of Al203[J].Journal of the European Ceramic Soci- ety,2000,20(10):1475-1481. |
| [15] | Pinggen Rao;Mikio Iwasa;Jianqing Wu .Effect of Al_2O_3 addition on ZrO_2 phase composition in the Al_2O_3-ZrO_2 system[J].Ceramics International,2004(6):923-926. |
| [16] | Li Bin;Deng Jianxin;Li Yousheng .Oxidation behavior and mechanical properties degradation of hot-pressed A12 O3/ZrBz/ZrO2 ceramic composites[J].International Journal of Refractory Metals and Hard Materials,2009,27(04):747-753. |
| [17] | Li Bin;Deng Jianxin;Wu Ze .Effect of cutting atmos- phere on dry machining performance with AI2 O3/ZrB,/ ZrOz ceramic tool[J].The International Journal of Ad vanced Manufacturing Technology,2010,49(05):459-467. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%