利用扫描电子显微镜(SEM),透射电子显微镜(TEM)结合选取电子衍射(SAED)研究了化学气相沉积低温热解炭的微观组织结构.结果表明:低温热解炭是由直径小于2μm的球形颗粒状炭组成,该球形颗粒状炭的核心是炭黑颗粒,外层为中织构热解炭.其沉积过程主要经历了:微小炭黑颗粒的萌生,炭黑颗粒外层的生长,炭颗粒表面热解炭的沉积和炭颗粒的聚集长大四个过程.
参考文献
[1] | Bokros J C.Chemistry and Physics ofCarbon[M].New York,USA:Marcel Dekker,Inc,1969:1-118. |
[2] | 张伟刚,赵俊国.低温热解炭微观结构的偏光显微镜研究[C].第七届全国新型炭材料学术研讨会论文集,2005:38-42. |
[3] | Agnes Oberlin .Pyrocarbons[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(1):7-24. |
[4] | B. Reznik;K.J. Huttinger .On the terminology for Pyrolytic carbon[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(4):621-624. |
[5] | E.Lopez-Honorato;PJ.Meadows;P.Xiao .Fluidized bed chemical vapor deposition of pyrolytic carbon-I.Effect of deposition conditions on microstructure[J].Carbon: An International Journal Sponsored by the American Carbon Society,2009(2):396-410. |
[6] | PJ.Meadows;E.Lopez-Honorato;P.Xiao .Fluidized bed chemical vapor deposition of pyrolytic carbon-II.Effect of deposition conditions on anisotropy[J].Carbon: An International Journal Sponsored by the American Carbon Society,2009(1):251-262. |
[7] | 朱钧国,张秉忠,杨冰.制备致密热解炭层的新工艺研究[J].新型炭材料,1998(02):1. |
[8] | 吴峻峰,白朔,刘树和,徐红军,成会明.大尺寸各向同性热解炭材料的制备与表征[J].新型炭材料,2006(02):119-124. |
[9] | Guo Ling-jun;Zhang Dong-sheng;Li Ke-zhi .Bamboo-shaped carbon nanofibers obtained in pyrolytic carbon by thermal gradient chemical vapor deposition[J].Carbon,2009(10):2540-2542. |
[10] | 徐国忠,李贺军,白瑞成,陈拂晓,胡志彪.新技术制备C/C复合材料及特性研究[J].无机材料学报,2006(06):1385-1390. |
[11] | 和永岗;李克智;李贺军 等.新型等温CⅥ过程中气体滞留时间的变化规律[J].固体火箭技术,2007,30(增刊.1):115-118. |
[12] | 吴峻峰,白朔,成会明.热处理对各向同性热解炭材料微观结构和力学性能的影响[J].新型炭材料,2006(03):225-230. |
[13] | Gerald A. Zickler;Bernd Smarsly;Notburga Gierlinger .A reconsideration of the relationship between the crystallite size L_a of carbons determined by X-ray diffraction and Raman spectroscopy[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(15):3239-3246. |
[14] | Kaae J L .The mechanism of the deposition of pyrolytic carbons[J].Carbon,1985,23(06):665-673. |
[15] | Juno H J;Lee J Y .How is pyrolytic carbon formed? Transmission electron micrographs which can explain the change of its density with deposition temperature[J].Carbon,1984,22(03):317-319. |
[16] | 石荣 .热解炭基碳/碳复合材料的组织与力学性能研究[D].西北工业大学,1997. |
[17] | 张伟刚,K.J. Hüttinger.化学气相沉积与渗透过程中热解炭织态结构生成机理研究[J].新型炭材料,2006(02):185-192. |
[18] | Donnet J B;Bansal R C;Wang M L.Carbon black:Science and Technology[M].New York,USA:Marcel Dekker,Inc,1993:67-80. |
[19] | Frederic Fabry;Gilles Flamant;Laurent Fulcheri .Carbon black processing by thermal plasma. Analysis of the particle formation mechanism[J].Chemical Engineering Science,2001(6):2123-2132. |
[20] | Guellali M;Oberacker R;Hoffmann MJ .Influence of the matrix microstructure on the mechanical properties of CVI-infiltrated carbon fiber felts[J].Carbon: An International Journal Sponsored by the American Carbon Society,2005(9):1954-1960. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%