欢迎登录材料期刊网

材料期刊网

高级检索

应用压块、焙烧方法,结合试样的显微结构及X射线衍射(XRD)分析,在固定的烧结温度与碱度的条件下,研究了不同高磷铁矿配比对烧结试样的显微结构和矿物组成的影响。结果表明随着高磷铁矿配比的增加,试样的显微结构由非均相结构向均相结构过渡;赤铁矿由粒状转变为熔蚀结构,铁酸钙由板状转变为针状;赤铁矿含量逐渐减少,铁酸钙含量逐渐增多。

Applying agglomerating, roasting method and combined with the microstructure and XRD analysis, the effect of sintering with allocating high-P iron ore on the microstructure and mineral composition was investigated at the conditions of a fixed sintering temperature and alkalinity. The results show that: with the increasing proportion of high-P iron ore, microstructure of samples has a transition from the non-homogeneous structure to the homogeneous structure, granular structure of hematite changes into the melting structure, calcium ferrate changes from slat into acicular, hematite content decreases while calcium ferrate increases.

参考文献

上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%