欢迎登录材料期刊网

材料期刊网

高级检索

参考文献

[1] Montoya R,Aperador W,Bastidas D M.Influence of conductivity on cathodic protection of reinforced alkali-activated slag mortar using the finite element method[J].Corros.Sci.,2009,51:2857
[2] DeGiorgi V G,Wimmer S A.Geometric details and modeling accuracy requirements for shipboard impressed current cathodic protection system modeling[J].Eng.Anal.Bound.Elem.,2005,29(5):15
[3] Alessandro B,Luca M,Francesca P,et al.Cathodic protection of carbon steel in natural seawater:Effect of sunlight radiation[J].Electrochim.Acta,2009,54:6472
[4] 乔进朝,王进锁,张石奎.变电站接地网牺牲阳极保护试验研究[J].山西电力,2009,154(3):21
[5] Song F M,Sridhar N.Modeling pipeline crevice corrosion under a disbonded coating with or without cathodic protection under transient and steady state conditions[J].Corros.Sci.,2008,50:70
[6] 任敏,周汝毅,张羿等.外加电流阴极保护技术对海港工程钢筋混凝土结构的防护[J].材料保护,2011,44(9):58
[7] 黄燕滨,宋高伟,丁华东等.两栖车辆用牺牲阳极材料研究进展[J].装甲兵工程学院学报,2011,25(2):81
[8] Xu J,Yao W.Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode[J].Constr.Build.Mater.,2009,23:2220
[9] Parthiban G T,Thirumalai P,Ravi R,et al.Cathodic protection of steel in concrete using magnesium alloy anode[J].Corros.Sci.,2008,50:3329
[10] 胡士信,王向农,徐快等.阴极保护手册[M].北京:化学工业出版社,2005
[11] 万冰华,费敬银,王少鹏等.牺牲阳极材料的研究、应用及展望[J].材料导报,2010,24(10):87
[12] Ma J L,Wen J B.Corrosion analysis of A1-Zn-in-Mg-Ti-Mn sacrificial anode alloy[J].J.Alloys Compd.,2010,496:110
[13] Barbalat M,Lanarde L,Caron D.Electrochemical study of the corrosion rate of carbon steel in soil:Evolution with time and determination of residual corrosion rates under cathodic protection[J].Corros.Sci.,2012,55:246
[14] 张文毓.牺牲阳极材料研究与应用[J].云南冶金,2008,37(6):45
[15] Li J,Lin C J,Lai Y K.Photogenerated cathodic protection of flower-like,nanostructured,N-doped TiO2 film on stainless steel[J].Surf.Coat.Technol.,2010,205:557
[16] Touzain S,Thu Q L,Bonnet G.Evaluation of thick organic coatings degradation in seawater using cathodic protection and thermally accelerated tests[J].Prog.Org.Coat.,2005,52:311
[17] Lu X Y,Zuo Y,Zhao X H,et al.The study of a Mg-rich epoxy primer for protection of AZ91D magnesium alloy[J].Corros.Sci.,2011,53:153
[18] 侯军才,张秋美.高电位镁牺牲阳极研究进展[J].中国腐蚀与防护学报,2011,31(2):81
[19] Song G L,Andrej A,Matthew D.Influence of microstructure on the corrosion of die cast AZ91D[J].Corros.Sci.,1999,41:249
[20] GB/T 17731-2009,镁合金牺牲阳极[S].北京:中国标准出版社,2009
[21] 苏鹏,杜翠薇,李晓刚.AZ63镁合金牺牲阳极的研究进展[J].材料保护,2008,41(4):4
[22] 张秋美,侯军才,梁国军.镁基牺牲阳极研究进展[J].铸造技术,2010,31(7):938
[23] Kim J G,Joo J H,Koo S J.Development of high-driving potential and high-efficiency Mg-basad sacrificial anodes for cathodic protection[J].J.Mater.Sci.Lett.,2000,17(9):477
[24] Qian G B,Geng H R,Tao Z D,et al.Effects of Ca addition on microstructure and properties of AZ63 magnesium alloy[J].Trans.Nonferrous Met.Soc.China,2004,14(5):987
[25] 侯军才,关绍康,任晨星等.微量锶对镁锰牺牲阳极显微组织和电化学性能的影响[J].中国腐蚀与防护学报,2006,26(3):166
[26] Yan A J,Feng L J,Wang Z P.Influence of yttrium addition on properties of Mg-based sacrificial anode[J].J.Rare Earths,2010,28:303
[27] Patricia W,Brenda L,Kevin H,et al.Environmental fate of sacrificial zinc anodes and influence of a biofilm[J].Int.Biodeterior.Biodegrad.,1996,37(3/4):151
[28] 韩巍.环境温度对锌合金牺牲阳极材料性能的影响与合金化改性研究[D].西安:西安建筑科技大学,2011
[29] 符岩,翟秀静,王杰等.添加稀土元素的锌基合金牺牲阳极的研究[J].稀土,2005,26(1):49
[30] Mohammad R,Saeri A K.Optimization of manganese and magnesium contents in As-cast Aluminum-Zinc-Indium alloy as sacrificial anode[J].J.Mater.Sci.Technol.,2011,27(9):785
[31] He J G,Wen J B,Li X D.Influence of Ga and Bi on electrochemical performance of Al-Zn-Sn sacrificial anodes[J].Trans.Nonferrous Met.Soc.China,2011,21(7):1580
[32] 郭炜,文九巴,马景灵等.铝合金牺牲阳极材料的研究现状[J].腐蚀与防护,2008,29(8):495
[33] Gudi S,Radosevi J,Kliskie M.Study of passivation of Al and Al-Sn alloys inborate buffer solutions using electrochemical impedance spectroscopy[J].Electrochim.Acta,2002,47:3009
[34] Sina H,Emamy M,Saremi M,et al.The influence of Ti and Zr on electrochemical properties of aluminum sacrificial anodes[J].Mater.Sci.Eng.,2006,A 431 (1-2):263
[35] Hou D L,Li D F,Han L,et al.Effect of lanthanum addition on microstructure and corrosion behavior of AL-Sn-Bi anodes[J].J.Rare Earths,2011,29(2):129
[36] Roy S,Sivan V,Balasubramaniyan V,et al.The role of surface free energy and lattice structure in the cathodic protection of Al-Zn-Hg alloy[J].Surf.Technol.,1978,7(3):239
[37] Breslina C B,Frierya L P,Carroll W M.The electrochemical behaviour of Al-Zn-In and Al-Zn-Hg alloys in aqueous halide solutions[J].Corros.Sci.,1994,36(1):85
[38] Ivanova E Y,Suryanarayanab C,Bryskinc B D.Synthesis of a nanocrystalline W-25 wt.% realloy by mechanical alloying[J].Mater.Sci.Eng.,1998,A251(1):255
[39] Mohammad J N,Farzad K.Effect of RE elements on the microstructural evolution of as cast and SIMA processed Mg-4Al alloy[J].J.Alloys Compd.,2011,509(5):1567
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%