为了对经受热疲劳的表面复合材料的设计提供理论依据,采用热震试验方法对通过真空实型铸渗(V-EPC)方法制备的WC/钢基表面复合材料的热疲劳性能进行了研究,重点讨论了表面复合材料热疲劳裂纹萌生及扩展的影响因素.结果表明,在本实验条件下Ni6025WC体积分数为15％时的热疲劳性能较5％时得到较大改善.表面复合材料的热疲劳裂纹的萌生和扩展的影响因素有以下几个方面:WC颗粒本身微观质量和热导率、复合层与基材中主要元素以及WC颗粒的平均热膨胀系数、复合层中WC颗粒之间的间距、由热震而产生的界面交变循环应力等.通过改善以上影响因素可以提高复合材料的热疲劳性能.
参考文献
| [1] | Sahin Y;Acilar M .Production and properties of SiCp-reinforced aluminum alloy composites[J].Composites Part A:Applied Science and Manufacturing,2003,34(08):709-718. |
| [2] | Zulai Li;Yehua Jiang;Rong Zhou;Dehong Lu;Rongfeng Zhou .Dry three-body abrasive wear behavior of WC reinforced iron matrix surface composites produced by V-EPC infiltration casting process[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(5/6):649-654. |
| [3] | 张永忠,高士友,石力开.激光熔覆Ni60A+WC/12Co复合涂层的组织及性能[J].金属热处理,2002(09):10-13. |
| [4] | 张衍诚,潘冶,陆韬,王春明.Al（Cr）2O3-Cr（MO）陶瓷基复合材料的制备与组织[J].复合材料学报,2006(02):104-109. |
| [5] | Aiguo Liu;Mianhuan Guo;Minhai Zhao;Changbai Wang .Microstructures and wear resistance of large WC particles reinforced surface metal matrix composites produced by plasma melt injection[J].Surface & Coatings Technology,2007(18):7978-7982. |
| [6] | 李祖来,蒋业华,叶小梅,周荣.WC在WC/灰铸铁复合材料基体中的溶解[J].复合材料学报,2007(02):13-17. |
| [7] | 符寒光 .复合变质处理高铬铸铁导板的研究及应用[J].上海金属,1998,20(03):43-44. |
| [8] | 《铸工手册》编写组.铸造有色合金手册[M].北京:机械工业出版社,1978 |
| [9] | 吴洁华,李包顺,郭景坤.SiO2-AlN复合材料的热物理性质[J].航空材料学报,1999(03):37-42. |
| [10] | Hasselman D P H .Approximate theory of thermal stress resistance of brittle ceramics involving creep[J].Journal of the American Ceramic Society,1969,50:454-457. |
| [11] | Hasselman D P H .Griffith criterion of thermal shock resistance of single-phase versus multiphase brittle ceramics[J].Journal of the American Ceramic Society,1969,52:288-289. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%