采用数值模拟方法对两端非对称进气双面离心压气机整级和简化模型的工作特性进行分析.结果表明:非对称进气双面离心压气机存在两种工作模式,随着流量减小由并行工作模式转换成单侧叶轮工作模式;同时,对两侧叶轮出口各区域速度三角形进行了分析,阐明了各区域速度分量存在差别的原因以及共享扩压器内的流动与掺混状况;此外,分析了小流量工况下两侧叶轮出口流场的非对称结构,发现该工况后方叶轮对应各量的周向掺混更为迅速.
参考文献
| [1] | 马娟娟,赵奔,陈山,杨策.双面离心压气机叶轮特性数值研究[J].中国科技论文,2012(11):836-840. |
| [2] | Jesus Manuel Fernandez Oro;Jose Gonzalez;Katia M. Arguelles Diaz;Francisco Israel Guerras Colon .Decomposition of Deterministic Unsteadiness in a Centrifugal Turbomachine: Nonlinear Interactions Between the Impeller Flow and Volute for a Double Suction Pump[J].Journal of Fluids Engineering: Transactions of the ASME,2011(1):011103-1-011103-10. |
| [3] | M. R. Hodkiewicz;M. P. Norton .The effect of change in flow rate on the vibration of double-suction centrifugal pumps[J].Proceedings of the Institution of Mechanical Engineers, Part E. Journal of Process Mechanical Engineering,2002(E1):47-58. |
| [4] | 高江永,王福军,瞿丽霞,刘竹青,戚兰英.大型双吸离心泵叶轮动应力特性[J].农业机械学报,2012(01):42-47,52. |
| [5] | Matthias Schleer;Reza S. Abhari .Clearance Effects on the Evolution of the Flow in the Vaneless Diffuser of a Centrifugal Compressor at Part Load Condition[J].Journal of turbomachinery,2008(3):031009-1-9-0. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%