凝胶注模成型研究进展

稀有金属材料与工程, 2005, 34(z2): 963-968.

凝胶注模成型研究进展

马景陶 ^1, , 林旭平 ^2, , 张宝清 ^3, , 谢志鹏 ^4,

1.清华大学,北京,100084

2.清华大学,北京,100084

3.清华大学,北京,100084

4.清华大学,北京,100084

基金项目: 国家重点基础研究发展计划(973计划)(G2000067204-01)

关键词：凝胶注膜成型 , 胶态成型 , 凝胶体系

Research Development on Gelcasting

凝胶注模成型是20世纪90年代初美国橡树岭国家实验室首创的胶态成型工艺.该工艺利用有机单体聚合反应形成的三维网络凝胶特性,使陶瓷悬浮体注入模具后原位固化成陶瓷坯体.它具有坯体均匀、坯体密度高、坯体强度高、近净尺寸成型等显著优点.本文全面阐述了凝胶注膜成型的近十年来的研究进展,并对其研究前景进行了展望.

参考文献

[1]	Omatete O O .[J].Ceram Bull,1991,70(10):1641.
[2]	Young A C et al.[J].Journal of the American Ceramic Society,1991,74(03):612.
[3]	杨金龙,谢志鹏,汤强,黄勇.α-Al2O3悬浮体的流变性及凝胶注模成型工艺的研究[J].硅酸盐学报,1998(01):41-46.
[4]	Prabhakaran K et al.[J].Journal of the European Ceramic Society,2000,20(08):1115.
[5]	张灿英,戚凭,李镇江.氧化铝基陶瓷凝胶注模成型工艺的研究[J].无机材料学报,1999(04):623.
[6]	Bleier A.Materials Research Society Symposium Proceedings, Proceedings of the Symposium on Flow and Microstructure of Dense Suspensions[M].USA: Materials Research Society,1992:289，109.
[7]	Waesche Rolf .[J].Silicates Industries,1995,7-8:193.
[8]	Wang H T et al.[J].Materials Research Bulletin,1997,32(12):1705.
[9]	Omatete O O.Materials Research Society Symposium Proceedings[M].USA: Materials Reasearch Society,1994:357.
[10]	Zhou L J et al.[J].Journal of the European Ceramic Society,2002,22(08):1347.
[11]	Zhou Longjie et al.[J].Journal of the European Ceramic Society,2000,20(01):85.
[12]	Maria J P.Ceramic Engineering and Science Proceedings, Proceedings of the 19th Annual Conference and Exhibition on Composites, Advanced Ceramics, Materials,and Structures-B[C][M].USA: America Ceramic Society,1995:1071.
[13]	Zimmerman M H et al.[J].Journal of the American Ceramic Society,1998,80(10):2725.
[14]	Wang Huanting et al.[J].Journal of Materials Science,1999,34(06):1163.
[15]	Xia C R et al.[J].Materials Research Bulletin,2001,36(09):1587.
[16]	Wang H T et al.[J].Ceramics International,1999,25(02):177.
[17]	Ma L G et al.[J].Journal of the European Ceramic Society,2002,22(13):2291.
[18]	Janney M A.Proceedings of the 1995 4th International Conference on Powder Metallurgy in Aerospace, Defense and Demanding Applications[C].USA: America Ceramic Society,1995:139.
[19]	Varma H K et al.[J].Materials Letters,1996,29(1-3):57.
[20]	Varma H et al.[J].Journal of the American Ceramic Society,2002,85(02):493.
[21]	Wasche R et al.[J].Journal of the European Ceramic Society,1997,17(2-3):421.
[22]	刘晓林 .氧化锆-氧化铝铝凝胶注模成型的研究[D].北京:清华大学,2001.
[23]	孙静等.[J].无机材料学报,1998,13(05):733.
[24]	Xie Zhipeng et al.[J].Materials Science and Engineering A,2003,349(1-2):20.
[25]	易中周,黄勇,谢志鹏.凝胶注模成型氧化锆耐火材料的研究[J].耐火材料,2002(01):9-12.
[26]	Studart A R et al.[J].American Ceramic Society Bulletin,2002,81(02):41.
[27]	Yi Zhongzhou et al.[J].Ceramics International,2002,28(04):369.
[28]	Yi Zhongzhou et al.[J].Materials Letters,2002,56(06):895.
[29]	Janney MA.;Walls CA.;Nunn SD.;Ogle RJ.;Westmoreland G.;Omatete OO. .Development of low-toxicity gelcasting systems[J].Journal of the American Ceramic Society,1998(3):581-591.
[30]	Omatete O O.Ceramic Engineering and Science Proceedings, Proceedings of the 1999 23rd Annual Conference on Composites[J].Advances in Ceramic Materials and Structures
[31]	[M].USA: America Ceramic Society,1999:241.
[32]	Chen Y L et al.[J].Journal of the European Ceramic Society,1999,19(02):271.
[33]	Vandeperre L J et al.[J].Journal of Materials Processing Technology,2003,135:312.
[34]	Olhero S M et al.[J].Journal of the American Ceramic Society,2002,20:423.
[35]	Jia Yu et al.[J].Journal of the European Ceramic Society,2002,22(12):1911.
[36]	Studart A R et al.[J].Journal of the American Ceramic Society,2002,85(11):2711.
[37]	Johnson S B et al.[J].Journal of the American Ceramic Society,2002,85(07):1699.
[38]	Bengisu Murat.[J].Ceramics International,2002(28):431.
[39]	Dhara Santanu et al.[J].Journal of the American Ceramic Society,2001,84(12):3048.
[40]	Santacruz I et al.[J].Journal of the American Ceramic Society,2002,85(10):2432.
[41]	Morissette S L et al.[J].Journal of the American Ceramic Society,1999,82(03):521.
[42]	Ha Jung-Soo .[J].Ceramics International,2000,26(03):251.
[43]	Sepulveda P et al.[J].CHEMISTRY OF MATERIALS,2001,13:3882.
[44]	Ghosal Sarbaji et al.[J].Journal of the American Ceramic Society,1999,82(03):513.
[45]	Janney M A et al.[P].US Patent:No:5885493,1999.
[46]	Barati A et al.[J].Ceramics International,2003,29(03):199.
[47]	Nunn S D.Ceramic Engineering and Science Proceedings, Proceedings of the 1996 20th Annual Conference on Composites, Advanced Cerdmics, Materials, and Structures -A[C][M].USA: America Ceramic Society,1996:209.
[48]	Kamboj R K et al.[J].Journal of the European Ceramic Society,2003,23(07):1005.
[49]	王红洁,贾书海,王永兰,金志浩.凝胶注成型中排胶温度对生坯强度及显微结构的影响[J].西安交通大学学报,2001(11):1198-1200.
[50]	Zhao Lei et al.[J].Materials Letters,2002,56:990.
[51]	苏亮等.[J].稀有金属材料与工程,2002,31(zk):129.
[52]	马利国 .陶瓷水基胶态注射成型新工艺的关键技术与应用研究[D].清华大学,2003.
[53]	Ma Jingtao et al.[J].Journal of the American Ceramic Society,2003,86(02):266.
[54]	Ma Jingtao et al.[J].Ceramics International,2002,28(08):859.
[55]	Ma Jingtao et al.[J].Journal of the European Ceramic Society,2003,23:2273.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

凝胶注模成型研究进展

Research Development on Gelcasting

参考文献