The microstructure, high strain rate superplasticity and tensile creep behavior of directionally solidified (DS) NiAl-Mo(Hf) alloy have been investigated. The alloy exhibits dendritic structure, where dendritic arm is NiAl phase, interdendritic region is Ni3Al phase, and Mo-rich phase distributes in the NiAl and Ni3Al phases. The alloy exhibits high strain rate superplastic deformation behavior, and the maximum elongation is 104.2% at 1373 K and strain rate of 1.04×10-2 s-1. The balance between strain hardening (by dislocation glide) and strain softening (by dynamic recovery and recrystallization) is responsible for the superplastic deformation. All the creep curves of the DS NiAl-Mo(Hf) alloy have similar shape of a short primary creep and dominant steady creep stages, and the creep strain is great. The possible creep deformation mechanism was also discussed. The creep fracture data follow the Monkman-Grant relationship.
参考文献
| [1] | K.C. Russell and J.W. Edington: Met. Sci. J., 1972, 6, 20.[2 ] R. Moskovic: J. Mater. Sci., 1978, 13, 1901.[3 ] D.R. Pank, M.V. Nathal and D.A. Koss: J. Mater. Res., 1990, 5, 942.[4 ] K. Ishida, R. Kainuma, N. Ueno and T. Nishizawa: Metall. Trans. A, 1991, 22, 441.[5 ] R. Yang, J.A. Leake and R.W. Cahn: Mater. Sci. Eng. A, 1992, 152, 227.[6 ] Y.H. Qi, J.T. Guo, C.Y. Cui, G.S. Li: Mater. Lett., 2002, 57, 552.[7 ] S. Guha, I. Baker, P.R. Munroe and J.R. Michael: Mater. Sci. Eng. A, 1992, 152, 2588.[8 ] R.S. Chen, J.T. Guo and W.L. Zhou: Intermetallics, 2000, 8, 663.[9 ] A. Misra, R. Gibala and R.D. Noebe: Mater. Trans. A, 1999, 30, 1003.[10] C.Y. Cui, J.T. Guo, Y.H. Qi and H.Q. Ye: Acta Metall. Sin. 2002, 38, 679. (in Chinese)[11] W.L. Zhou, J.T. Guo, R.S. Chen and J.Y. Zhou: Mater. Lett., 2001, 51, 342.[12] X.H. Du, J.T. Guo and B.D. Zhou: Scripta Mater., 2001, 45, 69.[13] X.H. Du, J.T. Guo and B.D. Zhou: Acta Metall. Sin., 2001, 37, 1112. (in Chinese)[14] T. Takasugi, J. Kishino and S. Hanada: Acta Metall. Mater., 1993, 41, 1009.[15] Y.H. Qi, J.T. Guo and C.Y. Cui: Mater. Sci. Technol., 2003, 19, 399.[16] C. Yuan, J.T. Guo, H.C. Yang and S.H. Wang: Acta Metall. Sin., 1998, 34, 858. (in Chinese)[17] J.P. Dennison, P.D. Holmes and B. Wilshire: Mater. Sci. Eng., 1978, 33, 35.[18] R.D. Noebe, C.L .Cullers and R.R. Bowman: J. Mater. Res., 1992, 7, 605.[19] Y.H. Qi, J.T. Guo and C.Y. Cui: J. Mater. Sci. Technol., 2003, 19, 59.[20] F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, 56, 593. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%