利用SMT全自动回流焊机和高温恒温试验箱,制备出经2次回流焊且不同时效处理时间的Sn-Ag3.0-Cu0.5/Cu焊点试件,对其金属间化合物(IMC)的厚度进行测量,发现其厚度的增长与时效时间的平方根近似成线性关系.采用统一粘塑性Anand本构模型来描述焊点的力学性能,运用有限元计算软件ANSYS对PBGA构件进行热循环模拟,对其在不同IMC厚度下的应力和应变响应进行分析.结果表明,芯片右下方焊点右上角热循环结束后累积的等效塑性应变最大,是整个PBGA构件的关键焊点;随着IMC厚度的增加,关键焊点热循环过程中的等效应力水平不断降低,相应剪切塑性应变范围△γ不断增大,热疲劳寿命Nf则不断降低:升温和高温保温过程中剪切塑性应变的增加量构成了剪切塑性应变范围△γ,且不同IMC厚度下升温段剪切塑性应变增加量占△γ的比例基本维持在95％左右.
参考文献
| [1] | 蔡积庆 .[J].印制电路信息,2005,3:59. |
| [2] | 许天旱,金志浩,王党会.SnAgCu系无铅钎料合金力学性能及钎焊性能研究[J].稀有金属材料与工程,2009(08):1462-1466. |
| [3] | 栗慧,卢斌,王娟辉.微量Ce对SnAgCu焊料与铜基界面IMC的影响[J].电子元件与材料,2009(04):40-42,46. |
| [4] | Kim J M;Woo S W;Chang Y S et al.[J].Thin Solid Films,2009,517:4255. |
| [5] | Hossain M M;Agonafer D;Viswanadham P.The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems[A].Las Vegas,Nevada,2004 |
| [6] | 魏鹤琳,王奎升.考虑IMC影响的PBGA无铅焊点温度循环有限元数值模拟[J].焊接学报,2012(01):109-112. |
| [7] | Chiou Y C;Jen Y M;Huang S H .[J].Microelectronics Reliability,2011,51:2319. |
| [8] | Xu L H;John H;Pang L .[J].Thin Solid Films,2006,504:362. |
| [9] | Yoon J W;Kim S W;Jung S B .[J].Journal of Alloys and Compounds,2005,391:82. |
| [10] | Chandra Rao B S S;Weng J;Shen L et al.[J].Microelectronic Engineering,2010,87:2416. |
| [11] | Yang PF;Lai YS;Jian SR;Chen J;Chen RS .Nanoindentation identifications of mechanical properties Of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds derived by diffusion couples[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):305-310. |
| [12] | Ma X;Wang F J;Qian Y Y et al.[J].Materials Letters,2003,57:3361. |
| [13] | 姜志忠 .[D].Harbin:Harbin University of Science and Technology,2007. |
| [14] | Brown S B;Kim K H;Anand L .[J].International Journal of Plastic,1989,5:95. |
| [15] | Anand L .[J].International Journal of Plastic,1985,1:213. |
| [16] | Zahn B A.[A].San Jose:IEEE Conference Publications,2002 |
| [17] | Tee T Y;Zhong Z W .[J].Microelectronics Reliability,2004,44(12):1957. |
| [18] | Chang B J;Wang L;Dirk J et al.[J].Welding Journal,2006,85(S):63. |
| [19] | Zheng S D;Sheng J G .[J].Power Engineering,1988,8(06):18. |
| [20] | Engelmaier W .[J].IEEE Transactions on Components Hybrids and Manufacturing Technology,1993,6(03):232. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%