基于三维全五向(Q5D)编织复合材料的细观结构模型,通过引入界面相单元,建立了含界面相Q5D编织复合材料单轴拉伸损伤失效分析模型.应用Python语言实现对ABAQUS的二次开发,将Linde等提出的失效准则和Von-Mises应力准则分别用于纱线和基体的渐进损伤判断,并确定材料的整体失效模式;对于界面相,采用Quads准则进行损伤判断.利用周期性位移边界条件,对含界面相Q5D编织复合材料的纵向拉伸应力-应变行为进行了渐进损伤数值模拟,详细讨论了在纵向拉伸载荷作用下材料的细观损伤起始、扩展和最终失效的演化过程,分析了材料的细观损伤失效机制,预测了材料的极限破坏强度,并研究了界面相性能对材料整体力学行为的影响规律.研究结果表明,数值模拟结果与实验值吻合较好,验证了渐进损伤模型的有效性,为该类材料的力学分析和优化设计奠定了基础.
参考文献
| [1] | Mouritza A P,Banniste M K,Falzonb P J,et al.Review of applications for advanced three-directional fiber textile composites[J].Composites:Part A,1999,30(12):1445-1461. |
| [2] | 卢子兴,杨振宇,李仲平.三维编织复合材料力学行为研究进展[J].复合材料学报,2004,21(2):1-7.Lu Zixing,Yang Zhenyu,Li Zhongping.Development of investigation into mechanical behavior of three-dimensional braided composites[J].Acta Materiae Compositae Sinica,2004,21(2):1-7. |
| [3] | Zhang F,Liu Z G,Wu Z,et al.A new scheme and microstructural model for 3D full 5 directional braided composites[J[.Chinese Journal of Aeronautics,2010,23(1):61-67. |
| [4] | Sun H Y,Qiao X.Prediction of the mechanical properties of three dimensional braided composites[J].Composites Science and Technology,1997,57(6):623-629. |
| [5] | 李典森,卢子兴,卢文书.三维四向编织复合材料刚度和强度的理论预测[J].应用数学和力学,2008,29(2):149-156.Li Diansen,Lu Zixing,Lu Wenshu.Theoretical prediction of the stiffness and strength of three-dimensional and fourdirectional braided composites[J].Applied Mathematics and Mechanics,2008,29(2):149-156. |
| [6] | Li D S,Lu Z X,Chen L,et al.Microstructure and mechanical properties of three-dimensional five-directional braided composites[J].International Journal of Solids and Structures,2009,46(18-19):3422-3432. |
| [7] | Zeng T,Fang D N,Li M,et al.Predicting the nonlinear response and failure of 3D braided composites[J].Materials Letters,2004,58(26):3237-3241. |
| [8] | Fang G D,Liang J,Wang B L.Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension[J].Composite Structures,2009,89(1):126-133. |
| [9] | Zuo W W,Xiao L Y,Liao D X.Statistical strength analysis of the 3D braided composites[J].Composites Science and Technology,2007,67(10):2095-2102. |
| [10] | Dong J W,Feng M L.Asymptotic expansion homogenization for simulating progressive damage of 3D braided composites[J].Composite Structures,2010,92(4):873-882. |
| [11] | 徐焜,许希武.三维编织复合材料渐进损伤的非线性数值分析[J].力学学报,2007,39(3):398-407.Xu Kun,Xu Xiwu.Nonlinear numerical analysis of progressive damage of 3D braided composites[J].Chinese Journal of Theoretical and Applied Mechanics,2007,39(3):398-407. |
| [12] | 徐焜,许希武.三维五向编织复合材料渐进损伤分析及强度预测[J],固体力学学报,2010,31(2):133-141.Xu Kun,Xu Xiwu.Progressive damage analysis and strength prediction of 3D five-directional braided composites[J],Chinese Journal of Solid Mechanics,2010,31(2):133-141. |
| [13] | Fang G D,Liang J,Wang B L,et al.Effect of interface properties on mechanical behavior of 3D four-directional braided composites with large braided angle subjected to uniaxial tension[J].Applied Composite Materials,2011,18:449-465. |
| [14] | 张超,许希武,郭树祥.含界面脱粘三维五向编织复合材料单向拉伸损伤失效机理研究[J].航空材料学报,2011,31(6):73-80.Zhang Chao,Xu Xiwu,Guo Shuxiang.Damage and failure mechanism analysis of 3D five-directional braided composites with interface debonding under unidirectional tension[J].Journal of Aeronautical Materials,2011,31(6):73-80. |
| [15] | 卢子兴,王成禹,夏彪.三维全五向编织复合材料弹性性能及热物理性能的有限元分析[J].复合材料学报,2013,30(3):160-167.Lu Zixing,Wang Chengyu,Xia Biao.Finite element analysis of elastic property and thermo-physical properties of threedimensional and full five-directional braided composites[J].Acta Materiae Compositae Sinica,2013,30(3):160-167. |
| [16] | 李东风,王浩静,贺 福,等.T300和T700炭纤维的结构与性能[J].新型炭材料,2007,22(1):59-64.Li Dongfeng,Wang Haojing,He Fu,et al.Structure and properties of T300 and T700 carbon fibers[J].New Carbon Materials,2007,22(1):59-64. |
| [17] | Xia Z H,Zhang Y F,Fernand E.A unified periodical boundary conditions for representative volume elements of composites and applications[J].International Journal of Solid & Structure,2003,40(8):1907-1921. |
| [18] | XiaZ H,Zhou C W,Yong Q L,et al.On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites[J],International Journal of Solid & Structure,2006,43(2):266-278. |
| [19] | Linde P,Pleitner J,Boer H D,et al.Modelling and simulation of fiber metal laminates[C]//ABAQUS User's Conference,Boston,Massachustts:[s.n],2004:421-439. |
| [20] | Abaqus 6,10 User's Manual,Abaqus Inc.[M].Pawtucket,RI,USA:Abaqus,2010. |
| [21] | Zhang B M,Yang Z,Sun X Y,et al.A virtual experimental approach to estimate composite mechanical properties:modeling with an explicit finite element method[J].Computational Materials Science,2010,49:645-651. |
| [22] | Duvaut G,Lions J L,Inequalities in mechanics and physics[M].Berlin:Springer,1976. |
| [23] | 黄雨霓.三维编织复合材料力学性能研究[D].北京:北京航空航天大学,2012.Huang Yu' ni,Research on the mechanical properties of three dimensional braided composites[D].Beijing:Beihang University,2012. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%