The flow field of molten steel and the interfacial behaviour between molten steel and liquid slag layer in medium-thin slab continuous casting mold with argon gas injection were studied by numerical simulation, in which the effects of nozzle submergence depth and port angle, casting speed, and argon gas flow rate on the flow and the level fluctuation of molten steel were considered. The results show that the molten steel is jetted from the submerged entry nozzle (SEN) with three ports into the mold and forms three recirculation zones including one upper recirculation zone and two lower recirculation zones. Argon gas injection results in a secondary vortex flow in the upper zone near the nozzle. For a given casting speed and argon gas flow rate, increasing the side port angle and submergence depth of nozzle can effectively restrain the steel/slag interfacial fluctuation. Increasing the casting speed would prick up the level fluctuation. For a fixed casting speed, argon gas flow rate has a critical value, the interfacial fluctuation with argon gas injection are stronger than the case without argon gas injection when the argon gas flow rate is less than the critical value, but when the argon gas flow rate exceeds the critical value, the level fluctuation is calmer than that without argon gas injection.
参考文献
| [1] | 刘和平,王忠英.板坯结晶器液面波动的数学物理模拟及其特点[J].钢铁研究,2002(02):47-50,54. |
| [2] | 谭利坚,沈厚发,柳百成,刘晓,徐荣军,李永全.连铸结晶器液位波动的数值模拟[J].金属学报,2003(04):435-438. |
| [3] | 曹娜,朱苗勇.高拉速板坯连铸结晶器内钢/渣界面行为的数值模拟[J].金属学报,2007(08):834-838. |
| [4] | 于海岐,朱苗勇.板坯结晶器电磁制动和吹氩过程的钢/渣界面行为[J].金属学报,2008(09):1141-1148. |
| [5] | Panaras G A;Theodorakakos A;Bergeles G .Numerical Investigation of the Free Surface in a Continuous Steel Casting Mold Model[J].Metallurgical and Materials Transactions,1998,29:1117. |
| [6] | Theodorakakos A;Bergeles G .Numerical Investigation of the Interface in a Continuous Steel Casting Mold Water Model[J].Metallurgical and Materials Transactions,1998,29:1321. |
| [7] | Anagnostopoulos J;Bergeles G .Three-Dimensional Modelling of the Flow and the Interface Surface in a Continuous Casting Mold Model[J].Metallurgical and Materials Transactions,1999,30:1095. |
| [8] | Gupta D;Lahiri A K .Water-Modeling Study of the Surface Disturbances in Continuous Slab Caster[J].Metallurgical and Materials Transactions,1994,25:227. |
| [9] | Haiqi YU;Miaoyong ZHU .Numerical Simulation of the Effects of Electromagnetic Brake and Argon Gas Injection on the Three-dimensional Multiphase Flow and Heat Transfer in Slab Continuous Casting Mold[J].ISIJ International,2008(5):584-591. |
| [10] | Pfeiler C;Wu M;Ludwig A.Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting[J].Materials Science and Engineering,2005(413):115. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%