研究了添加微量稀土Y对Sn3.8Ag0.7Cu钎料合金显微组织和性能的影响,通过对钎料的熔化温度、润湿性能、接头剪切强度的测试及显微组织观察,指出含微量稀土的SnAgCuY合金是性能优良的无铅钎料合金,同时确定了最佳的Y含量范围.
参考文献
[1] | Richard B .Lead-Free Soldering -World's Apart,National Physical Laboratory,NPL News,UK[OL].http://www.lead-free.org,2004. |
[2] | 史耀武,夏志东,雷永平,李晓延,郭福.电子组装生产的无铅技术与发展趋势[J].电子工艺技术,2005(01):6-9,20. |
[3] | 朱颖;方宏渊 .[J].Electronics Process Technology,1998,19(02):60. |
[4] | Xin Ma .Analysis on Mechanical and Metallurgical Factors of Soldered Joint Failure for Micro-Electronic Surface Package[D].哈尔滨:哈尔滨工业大学,2000. |
[5] | Zhigang Chen .Investigation of Creep Behavior of SnAgCu Soldered doints[D].北京:北京工业大学,2003. |
[6] | Chen Z G;Shi Y W;Xia Z D et al.[J].Journal of Electronic Materials,2002,31(10):1122. |
[7] | Zhigang Chen;Yaowu Shi;Zhidong Xia;Yanfu Yan .Properties of Lead-Free Solder SnAgCu Containing Minute Amounts of Rare Earth[J].Journal of Electronic Materials,2003(4):235-243. |
[8] | Kim K S;Huh S H;Suganuma K.[J].Microelectronics Reliability,2003(43):259. |
[9] | Wu C M L;Yu D Q;Law C M T;Wang L.[J].Materials Science and Engineering R:Reports,2004(44):1. |
[10] | Yu D Q;Zhao J;Wang L.[J].Journal of Alloys and Compounds,2004(376):170. |
[11] | JISZ 3198-1985.JISZ 3198-5.Test Methods for Lead-Free Solders.Part 5:Methods for Tensile Tests and Shear Tests on Solder Joints[S].,2003. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%