金刚石表面镀钛与否对Co基和Cu-Sn基胎体抗弯强度、 金刚石锯片切割性能的对比研究表明， 金刚石表面镀钛可提高金刚石工具的寿命及切割效率。 采用扫描电镜对抗弯强度试验样品断面和使用过的锯片刀头的观察分析， 确立了镀钛层与不同胎体的结合类型。
The effects of Ti-coated on diamond surface on transverse-rupture strength(TRS) of Co based and Cu-Sn based samples and the cutting performance of saw blades were investigated. The results show that the TRS increases when using Ti-coated diamond and that the tool lives of Co based and Cu-Sn based saw blade with Ti-coated diamond were 47.0% and 20.1% longer than that of those with uncoated diamond, respectively. Scanning electron microscopy(SEM) photographs confirm that a metallurgical bonding layer exists when diamond is coated with titanium, which improves the bonding strength between diamond and matrix and impedes aggressive chemistry reaction between them.
参考文献
| [1] | 臧建兵;王艳辉;王明智.金刚石热稳定性的几个方面和影响因素的探讨[J].金刚石与磨料磨具工程,1997(05):5-7. |
| [2] | Naidich Yu V.Metal and alloy bond strengths to diamond[J].Industrial Diamond Review,1984(06):327-331. |
| [3] | 臧建兵;王艳辉;王明智.Ti, Mo, W, Cr及其合金镀层与超硬磨料之间结合性能的研究[J].金刚石与磨料磨具工程,1997(02):6-8. |
| [4] | 束德林.金属力学性能[M].北京:机械工业出版社,1987:11. |
| [5] | 余顺海;唐羽章.混杂复合材料[M].长沙:国防科技大学出版社,1987:9. |
| [6] | Molinali A .Study of the diamond-matrix interface in hot-pressed cobalt-based tools[J].Materials Science and Engineering,1990,A130:257-261. |
| [7] | 王凤荣;张晋远;朱瑞珍.关于钴其胎体材料对金刚石具有高把持力机理的研究[J].金刚石与磨料磨具工程,1998(04):2-6. |
| [8] | 李晨辉 .金刚石锯切过程中几个基本问题的研究[D].Changsha:Central South University of Technology,1999. |
| [9] | Tonshoff H K;Asche J.An indicator system for saw grit[J].Industrial Diamond Review,1997(01):7-13. |
| [10] | 胡焕校,刘静.金刚石锯片胎体的耐磨性[J].中国有色金属学报,2000(03):400. |
| [11] | Davis P R;Fish M L;Peacock S.Wear of metal-bond diamond tools in the machining of stone[J].Industrial Diamond Review,1996(03):84. |
| [12] | 胡焕校 .金刚石锯片刀头优化设计的研究及应用[D].中南工业大学,1998. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%