利用ABAQUS有限元软件对Cu、Fe、Cu叠片进行了轧制复合热力耦合模拟。获得了轧制复合过程的应力一应变场和温度场变化，对热轧过程有了更清晰的认识；数值模拟与试验结果吻合良好，复合板各层厚度变化误差在5%左右，可对预测产品厚度，同时对工艺的制定提供理论指导。
With the help of finite element method software ABAQUS, coupled thermal-stress simulation of the cop- per/steel/copper thin plate hot-roll bonding was investigated. The stress and strain field and the temperature field, which was helpful to understand the hot rolling process, were obtained during the rolling process. The simula- tion results well meet with experiment through simulations and experiments, and the error of the variation in thick- ness of each layer is about 5 %, which can provide a prediction for the thickness of the production and also can pro- vide a good theoretical conduct.
参考文献
| [1] | 袁希平.纯铁DT9性能简介[J].真空电子简介,1993(03):43. |
| [2] | 谢水生;李雷.金属塑性成形的有限元模拟技术及应用[M].北京:科学出版社,2008 |
| [3] | 王慎平,刘北英.ABAQUS中的非线性模拟[J].机械制造与自动化,2006(02):20-22. |
| [4] | 刘畅 .基于ABAQUS冷轧薄板工作辊有限元研究[D].内蒙古科技大学,2009. |
| [5] | LIN Zone-ching;HUANG Tanguo.Hot Rolling of an Alu- minum-Copper Sandwich at Strip With the Three-Dimensional Finite Element Method[J].Journal of Materials Processing Technology,2000(99):154. |
| [6] | 王学 .基于ALE方法求解流固耦合问题[D].国防科学技术大学,2006. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%