借助X射线衍射技术,研究了304奥氏体不锈钢热诱发马氏体相变倾向.结果表明:C、Mn、Cr和Ni接近标准规范下限,304不锈钢的稳定性急剧下降,致使液氮内冷却后接近1/3的奥氏体转变为α'或ε马氏体,室温拉伸即形成应变诱发ε和α'马氏体,而且较小的室温变形显著增大随后液氮内冷却的热诱发α'马氏体相变倾向,但随室温预应变增大快速形成应变诱发α'马氏体,致使随后在液氮内发生热诱发α'马氏体倾向下降.此外,研究表明ε马氏体的形成及消失与α'马氏体的累积量有关.
参考文献
| [1] | SHIN Hong-chul;HA Tae-kwen;CHANG Young-on .Kinetics of deformation induced martensitic transformation in a 304 stainless steel[J].Scripta Materialia,2001,45(07):823-829. |
| [2] | Gonznlez B M;Castro C S B;Buono V T L et al.The influence of copper addition on the formability of AISI 304 stainleas steel[J].Materials Science and Engineering,2003,A343(01):51-56. |
| [3] | Han G;He J;Fukuyama S et al.Effect of strain-induced martensite on hydrogen environment embrittlement of sensitized anstenitic stainless steel[J].Acta Materials,1998,46(13):4559-4570. |
| [4] | Llewel|yn DT .Work hardening effectsin anstenitie stainlees steels[J].Material Science and Technolngy,1997,13(05):389-400. |
| [5] | Amar K D;David C;Martin C et al.Quantitative measurement of deformation-indueed martensite in 304 stainless steel by X-ray diffractien[J].Scripta Materia Jia,2004,50(12):1445-1449. |
| [6] | Wang H S;Yang J R;Bhadeehia H K .Characterization of severely deformed austenitic stainless steel wlre[J].Material Science and Tecimology,2005,21(11):1323-1328. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%