凹陷涡发生器是一种高效的燃气轮机涡轮叶片冷却结构,本文对分别具有球形和泪滴形凹陷涡发生器阵列的表面传热与流动性能开展了实验和数值计算研究.本文分别采用Standardk-ω,SST和Reliazablek-ε三种湍流模型计算了凹陷涡发生器表面湍流传热与流阻性能,并与实验结果进行了对比,确定了Standardk-ω是研究凹陷传热和流动最精确的湍流模型.通过该研究,获得了球形和泪滴形凹陷涡发生器在雷诺数范围8500~60000内的传热及流阻和流动特性.该实验研究表明,与光滑通道内湍流流动相比,球形凹陷传热性能提高约60%,摩擦因子增加约70%;泪滴凹陷传热性能提高约90%,摩擦因子增加一倍左右.泪滴形凹陷表现出更好的传热性能和综合热性能.
参考文献
[1] | N. K. Burgess;P. M. Ligrani .Effects Of Dimple Depth on Channel Nusselt Numbers and Friction Factors[J].Journal of heat transfer: Transactions of the ASME,2005(8):839-847. |
[2] | Ligrani PM.;Mahmmod GI.;Hill ML.;Harrison JL. .Flow structure due to dimple depressions on a channel surface[J].Physics of fluids,2001(11):3442-3451. |
[3] | G. I. Mahmood;M. L. Hill;D. L. Nelson;P. M. Ligrani;H.-K. Moon;B. Glezer .Local Heat Transfer and Flow Structure on and Above a Dimpled Surface in a Channel[J].Journal of turbomachinery,2001(1):115-123. |
[4] | Johann Turnow;Nikolai Kornev;Valery Zhdanov;Egon Hassel.Flow structures and heat transfer on dimples in a staggered arrangement[J].International journal of heat and fluid flow,2012:168-175. |
[5] | Hyun-Min Kim;Mi-Ae Moon;Kwang-Yong Kim .Multi-objective optimization of a cooling channel with staggered elliptic dimples[J].Energy,2011(5):3419-3428. |
[6] | Ronald S. Bunker;Katherine F. Donnellan .Heat Transfer and Friction Factors for Flows Inside Circular Tubes With Concavity Surfaces[J].Journal of Turbomachinery,2003(4):665-672. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%