针对非金属夹杂物引起的钢材质量问题,用高速摄像仪和图像处理软件对结晶器水模内的空气泡去除夹杂物模拟粒子的行为和机理进行了研究.结果表明,粒子通过粘附去除,俘获过程分为5个子过程,即粒子向气泡靠近并发生碰撞、粒子与气泡粘附形成液膜、液膜减到足够薄后破裂形成新的气固接触界面、粒子滑移到气泡底部、两者处于动态的稳定状态一起上浮.粒子在气泡表面上滑移时处于不稳定状态,气泡受到轻微扰动,粒子会失稳脱离液膜.
参考文献
| [1] | Yuji Miki;Brian G. Thomas .Modeling of inclusion removal in a tundish[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1999(4):639-654. |
| [2] | Thomas B G;Huang X;Sussman R C .Simulation of Argon Gas Flow Effects in a Continuous Slab Caster[J].Metallurgical and Materials Transactions,1994,25B:527. |
| [3] | Lifeng Zhang;Brian G. Thomas .Numerical simulation on inclusion transport in continuous casting mold[J].Journal of University of Science and Technology Beijing,2006(4):293-300. |
| [4] | 薛正良,王义芳,王立涛,李正邦,张家雯.用小气泡从钢液中去除夹杂物颗粒[J].金属学报,2003(04):431-434. |
| [5] | Xiaofeng ZHENG;Peter C. HAYES;Hae-Geon LEE .Particle Removal from Liquid Phase Using Fien Gas Bubbles[J].ISIJ International,1997(11):1091-1097. |
| [6] | 倪冰,罗志国,狄瞻霞,韩立浩,邹宗树.板坯连铸结晶器内夹杂物去除的水模实验研究[J].连铸,2009(01):1-5. |
| [7] | 郑淑国,朱苗勇.吹氩钢液精炼过程气泡去夹杂机理研究[J].钢铁,2008(06):25-29. |
| [8] | ZHANG L F;Aoki J;Thomas B G .Inclusion Removal by Bubble Flotation in a Continuous Casting Mold[J].Metallurgical and Materials Transactions,2006,37B:361. |
| [9] | 郭烈锦.两相与多相流动力学[M].西安:西安交通大学出版社,2002 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%