通过电导率、常温力学性能测试和透射电镜研究了时效对7055铝合金淬火敏感效应的影响.结果表明:合金固溶后慢速淬火时,晶粒内部和晶界上析出大量粗大的η平衡相,基体中的溶质过饱和度及空位浓度大大降低,不利于时效时强化相的均匀弥散析出,导致合金的力学性能下降;双级时效对快速淬火合金的力学性能影响不大,但提高了慢速淬火合金的力学性能,因而一定程度减少了合金的淬火敏感效应;这是因为相对单级时效而言双级时效可使慢速淬火合金中得到更多强化相,分布也更均匀弥散,从而减小空位浓度降低带来的不利影响;在本研究中,100℃,24 h+121℃,24 h是最佳的双级时效制度.
参考文献
| [1] | 李成功;巫世杰;戴圣龙;杨守杰 .先进铝合金在航空航天工业中的应用与发展[J].中国有色金属学报,2002,12(03):14-21. |
| [2] | J.S. Robinson;R.L. Cudd;D.A. Tanner .Quench sensitivity and tensile property inhomogeneity in 7010 forgings[J].Journal of Materials Processing Technology,2001(1/3):261-267. |
| [3] | S.T. Lim;S.J. Yun;S.W. Nam .Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):82-90. |
| [4] | D. Dumont;A. Deschamps;Y. Brechet;C. Sigli;J. C. Ehrstrom .Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2004(5):567-576. |
| [5] | A. Deschamps;Y. Brechet .Nature and distribution of quench-induced precipitation in an Al-Zn-Mg-Cu alloy[J].Scripta materialia,1998(11):1517-1522. |
| [6] | Deschamps A.;Brechet Y. .Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):200-207. |
| [7] | D. Godard;P. Archambault;E. Aeby-Gautier .Precipitation sequences during quenching of the AA 7010 alloy[J].Acta materialia,2002(9):2319-2329. |
| [8] | Y.V.Milman;A.I.Sirko;D.V.Lotsko .Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc[J].Materials Science Forum,2002(Pt.2):1217-1222. |
| [9] | Porter D A;Easterling K E.Phase Transformation in Metals and Alloys[M].Oxford:Alden Press,1981:292. |
| [10] | Mackenzies D S .Quench Rate and Aging Effects in AlZnMgCu Aluminum Alloy[D].Missouri:University of Missouri-Rolla,2000. |
| [11] | N.Q. Chinh;J. Lendvai;D.H. Ping .The effect of Cu on mechanical and precipitation properties of Al-Zn-Mg alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):52-60. |
| [12] | Staley J T;Brown T H;Schmidt R .Heat treating characteristics of high strength Al-Zn-Mg-Cu alloys with and without silver additons[J].METALLURGICAL TRANSACTIONS,1972,3(01):191-199. |
| [13] | P. GUYOT;L. COTTIGNIES .PRECIPITATION KINETICS, MECHANICAL STRENGTH AND ELECTRICAL CONDUCTIVITY OF AlZnMgCu ALLOYS[J].Acta materialia,1996(10):4161-4167. |
| [14] | Vasudevan A K;Doherty R D .Grain boundary ductile fracture in precipitation hardened aluminum alloys[J].Acta Metalluraica,1987,35(06):1193-1219. |
| [15] | L. K. BERG;J. GJONNES;V. HANSEN .GP-ZONES IN Al-Zn-Mg ALLOYS AND THEIR ROLE IN ARTIFICIAL AGING[J].Acta materialia,2001(17):3443-3451. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%