利用焊接热模拟方法及析出相形貌观察,研究了不同Ti、N含量的高Nb管线钢焊接粗晶区的奥氏体晶粒尺寸及其分布规律、析出相对奥氏体晶粒尺寸及冲击韧性的影响.结果表明:焊接热影响区(HAZ)析出相粒子为富Ti的TixNb1-x(CyN1-y)复合粒子,其尺寸大多数在100 nm以下.分析认为高铌钢中Ti含量应控制在0.010%~0.015%间(Ti/N值在2~3间),该范围内奥氏体晶粒尺寸能被有效钉扎,冲击韧性值显著提高.
参考文献
[1] | Pickering F B.Physical Metallurgy and the Design of Steels[M].London:Science Publishers Ltd,1978:63. |
[2] | 陈茂爱,武传松,杨敏,唐逸民,吴人洁.Ti-V-Nb微合金钢第二相粒子在焊接热循环过程中的变化规律[J].金属学报,2004(02):148-154. |
[3] | Lee J L;Pan Y T .Microstructure and toughness of the simulated HAZ in Ti and AI killed steels[J].Mater Scientific Enger,1991,A136(02):109-119. |
[4] | Yan W;Shan Y Y;Yang K .Effect of TiN inclusions on the impact toughness of low-carbon microalloyed steel[J].Metallurgical and Materials Transactions,2006,37A,7:2147-2158. |
[5] | L. S. Shvindlerman;G. Gottstein .Precipitation accelerated grain growth[J].Scripta materialia,2004(7):1051-1054. |
[6] | Moon Joonoh;Lee Changhee;Uhm Sangho et al.Coarsening kinetics of TiN particle in a low alloy in weld HAZ considering critical particle size[J].Acta Materialia,2006,54:1053-1061. |
[7] | Gladman T;Fourlaris G;Talafi-Noghani M .Grain refinement of steel by oxidic second phase particles[J].Materials Science and Technology,1999,15:1424-1434. |
[8] | S. F. MEDINA .Influence of Ti and N Contents on Austenite Grain Control and Precipitate Size in Structural Steels[J].ISIJ International,1999(9):930-936. |
[9] | Linaza M A;Romero J L;Rodrignez-Ibabe J M et al.Cleavage fracture of microalloyed forging steels[J].Scripta Metallurgica et Materialia,1995,32(03):395-400. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%