As-cast CC slabs of microalloyed steels are prone to surface and sub-surface cracking. Precipitation phenomena in-itiated during solidification reduce ductility at high temperature. The unidirectional solidification unit is employed to sim-ulate the solidification process during continuous casting. Precipitation behavior and thermal stability are systemati-cally investigated. Samples of adding titanium and niobium to steels have been examined using field emission scanning electron microscope (FE-SEM), electron probe X-ray microanalyzer (EPMA), and transmission electron microscope (TEM). It has been found that the addition of titanium and niobium to high-strength low-alloyed (HSLA) steel resuited in undesirable large precipitation in the steels, i. e. , precipitation of large precipitates with various morphologies. The composition of the large precipitates has been determined. The effect of cooling rate on (Ti, Nb)(C, N) precipitate formation is investigated. With increasing the cooling rate, titanium-rich (Ti,Nb)(C, N) precipitates are transformed to niobium-rich (Ti,Nb)(C,N) precipitates. The thermal stability of these large precipitates and oxides have been assessed by carrying out various heat treatments such as holding and quenching from temperature at 800 and 1 200 ℃. It has been found that titanium-rich (Ti,Nb)(C,N) precipitate is stable at about 1 200 ℃ and niobi-um-rich (Ti,Nb)(C,N) precipitate is stable at about 800 ℃. After reheating at 1 200 ℃ for 1 h, (Ca, Mn)S and TiN are precipitated from Ca-Al oxide. However, during reheating at 800 ℃ for 1 h, Ca-Al-Ti oxide in specimens was stable. The thermodynamic calculation of simulating the thermal process is employed. The calculation results are in good agreement with the experimental results.
参考文献
| [1] | Cuddy L J;Lally J S;Porter L F.Improvement of Toughness in the HAZ of High-Heat-Input Welds in Ship Steels[A].Ohio:American Society for Metals,1983:697. |
| [2] | Houghton D C;Weatherly G C;Emhury J D.Characterization of Carbonitrides in Ti Bearing HSLA Steels[A].Warrendale Pa:The Metallurgical Society of AIME,1982:267. |
| [3] | Chen Z;Loretto M H;Cochrane R C .Nature of Large Precipitates in Titanium-Containing HSLA Steels[J].Materials Science and Technology,1987,3(10):838. |
| [4] | Xiaojun Zhuo,Xinhua Wang,Wan jun Wang,Lee HaeGeon.Thermodynamic calculations and experiments on inclusions to be nucleation sites for intragranular ferrite in Si-Mn-Ti deoxidized steel[J].北京科技大学学报（英文版）,2007(01):14-21. |
| [5] | Pickering F B.High-Strength Low-Alloy Steels-a Decade of Progress[A].New York:Union Carbide,1977:9. |
| [6] | Rodrigues P C M;Pereloma E V;Santos D B .Mechanical Prosperities of an HSLA Bainitic Steel Subjected to Controlled Rolling With Accelerated Cooling[J].Materials Science and Engineering,2000,283A(1-2):136. |
| [7] | Tamura I;Imao.Thermomechanical Processing of High-Strength Low-Alloying Steels[M].Boston:Butterworth and Co,1988 |
| [8] | Tanaka T .Controlled Rolling of Steel Plate and Strip[J].International Metals Reviews,1981,26(04):185. |
| [9] | Pogorzhelskyi V J;Matrosov Y J;Nasibov A G.Niobium and Vanadium Carbonitridea in Low-Pearlite Steels[A].New York:Union Carbide,1977:100. |
| [10] | Tanaka T;Tabata N;Hatomura T.Three Stages of the Controlled-Rolling Process[A].New York:Union Carbide,1977:107. |
| [11] | Takechi H;Matsuda H;Tamehirn H.Application of Bainite and Ferrite--Martensite Structure for High-Strength Heavy-Gage Linepipe[A].Philadelphia PA:American Society for Testing and Materials,1982:149. |
| [12] | Cohen M;Hansen S S.Microstructural Control in Microalloyed Steels[A].Philadelphia PA:American Society for Testing and Materials,1978:34. |
| [13] | Uemori R.;Tamehiro H. .AP-FIM Analysis of Ultrafine Carbonitrides in Fire-Resistant Steel for Building Construction[J].NIPPON STEEL TECHNICAL REPORT,1996(69):23-28. |
| [14] | Zhuo X J;Wang X H;Wang W J et al.Nature of Large (Ti,Nb) (C,N) Precipitates During Solidification in Ti,NbAddition HSLA Steel[J].Journal of University of Science and Technology Beijing,2007,14(02):112. |
| [15] | CAI Kai-ke.Casting and Solidification[M].北京:冶金工业出版社,1987 |
| [16] | Ohnaka I .Mathematical Analysis of Solute Redistribution During Solidification With Diffusion in Solid Phase[J].Transactions of the Iron and Steel Institute of Japan,1986,26(12):1045. |
| [17] | Jun H J.Precipitation During Continuous Casting in Ti-Nb Bearing HSLA Steels[M].Pohang,South Korea:Pohang University of Science and Technology,2003 |
| [18] | Bale C.;Chartrand P.;Degterov SA.;Eriksson G.;Hack K.;Ben Mahfoud R. Melancon J.;Pelton AD.;Petersen S. .FactSage thermochemical software and databases[J].Calphad: Computer Coupling of Phase Diagrams and Thermochemistry,2002(2):189-228. |
| [19] | Imlach J A;Glasser F P .Phase Equilibria in the System CaO-Al2O3-TiO2[J].Journal of the British Ceramic Society,1968,67:581. |
| [20] | Morgan P E D;Koutsoutis M S .Phase Relations in the Ca-Ti-Al-O System,Further Studies on Members of the CTA Family[J].Journal of Materials Science Letters,1985,4(03):321. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%