欢迎登录材料期刊网

材料期刊网

高级检索

Hot strips of low carbon steels with Ti additive [contain C 0.04%-0.07%, Si≤0. 6%, Mn≤0. 6%,Ti 0.06%-0.14% (mass percent)] produced by EAF-CSP (Electric Arc Furnaces-Compact Strip Production)process were examined by TEM, HREM and XRD. Carbonitrides with different N/C ratio were found in the samples. The varying composition of the Ti-carbonitrides resulted from the supersaturation of Ti and temperature at which the compound was formed. In the tested steel, total mass fraction of the precipitates including cementite, carbonitride and a small quantity of Fe3O4, Al2O3, Ti2 CS and AlN was about 0. 305%. XRD results showed that about a quarter of the powder extracted by electrolysis was titanium nitrides, carbonitrides and carbides. Particle arrays formed by interphase precipitation could be observed either in slabs or in hot strips. The dominant reaction mechanisms were discussed. Compared with the conventional cold charge process, small amount of Ti addition would be more effective for precipitation of fine precipitates in the steels produced by CSP process.

参考文献

[1] Khalid F A;Edmonds D V .Interphase Precipitation in Microoalloyed Engineering Steels and Model Alloy[J].Journal of Materials Science and Technology,1993,9(05):384.
[2] Mingzhuo Bai,Delu Liu,Yanzhi Lou,Xinping Mao,Liejun Li,Xiangdong Huo.Effects of Ti addition on low carbon hot strips produced by CSP process[J].北京科技大学学报(英文版),2006(03):230-234.
[3] LIU De-lu;MAO Xin-ping;NI Xiao-qing et al.Carbonitride Precipitations in Low Carbon Ti-Microalloyed Steels Produced by CSP Process[J].Iron & Steel,2006,41(z 1):238.
[4] 毛新平,孙新军,康永林,林振源,周健.EAF-CSP流程钛微合金化高强钢板的组织和性能研究[J].钢铁,2005(09):65-68,76.
[5] Kaspar Radko;Zentara Norbert;Herman Jean Claude .Direct Charging of Thin Slabs of a Ti-Microalloyed Low Carbon Steel for Cold Forming[J].Steel Research International,1994,65(07):279.
[6] Y. LI;J. A. WILSON;D. N. CROWTHER .The effects of vanadium, niobium, titanium and zirconium on the microstructure and mechanical properties of thin slab cast steels[J].ISIJ International,2004(6):1093-1102.
[7] Alexander L;Reynolds H P .Basic Aspects of X-Ray Absorption[J].Analytical Chemistry,1948,20:886.
[8] Turkdogan E T .Causes and Effects of Nitride and Carbonitride Precipitation During Continuous Casting[J].Ironmaking and Steelmaking,1989,16(05):61.
[9] XIAO Feng.Study of Precipitation,Grown Process,and Block Effect of Ti(C,N) in Micro-Titanium Steels[J].Metallurgy of Sichuan,1998(04):46.
[10] M.Hua;C.I.Garcia .Precipitation Behavior in Ultra-Low-Carbon Steels Containing Titanium and Niobium[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1997(9):1769-1780.
[11] HUO Xiang-dong .Study on the Grain Refinement and Precipitation of Low Carbon Steel Produced by Thin Slab Casting and Rolling[D].北京:北京科技大学,2003.
[12] Christian J W.The Theory of Transformations in Metals and Alloys[M].Oxford:Pergamon Press,2002
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%