通过扫描电镜(SEM)、透射电镜(TEM)和能谱分析(EDS)等方法,研究了超级奥氏体不锈钢Cr20Ni24Mo6N钢凝固过程中的偏析行为,采用Thermo-Calc方法揭示了各相的析出规律,基于残余偏析指数理论公式计算分析了合金元素的扩散规律,研究了均匀化参数对合金元素再分配的影响规律.结果表明:Cr20Ni24Mo6N钢铸锭存在严重的Mo元素偏析,主要析出相为σ相,残余偏析指数随加热温度的升高和保温时间的延长而减小,元素偏析基本消除的均匀化参数为1250℃/24 h.
参考文献
[1] | Ming Qian;J.N. DuPont .Microsegregation-related pitting corrosion characteristics of AL-6XN superaustenitic stainless steel laser welds[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2010(10):3548-3553. |
[2] | Shawn A. Cefalu;Matthew J.M. Krane .Comparison of predictions of microsegregation in the Ni-Cr-Mo system to experimental measurements[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):371-378. |
[3] | T. Koutsoukis;K. Konstantinidis;E. G. Papadopoulou .Comparative study of precipitation effects during aging in superaustenitic and superferritic stainless steels[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2011(5):943-950. |
[4] | Anburaj, J.;Nazirudeen, S.S.M.;Narayanan, R.;Anandavel, B.;Chandrasekar, A..Ageing of forged superaustenitic stainless steel: Precipitate phases and mechanical properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:99-107. |
[5] | 孟丽君,邢辉,孙坚.AL6XN奥氏体钢的时效析出研究[J].材料热处理学报,2011(05):84-89. |
[6] | 臧华勋,肖学山,童潮山,张忠华,张春霞,邵卫东.新型耐蚀超级奥氏体不锈钢中的高温析出相[J].钢铁研究学报,2009(02):44-47. |
[7] | Anburaj J;Chandrasekar A;Mohamed Nazirudeen S S et al.Effect of solution annealing on structure and properties of high Mo superaustenitic stainless steel casings[J].International Journal of Cast Metals Research,2012,25(05):287-295. |
[8] | Momeni A;Dehghani K;Keshmiri H et al.Hot deformation behavior and microstruetural evolution of a superaustenitic stainless steel[J].Materials Science and Engineering A,2010,527:1605-1611. |
[9] | Yi Wang;Dezhi Wang;Jianhui Yan.Preparation and characterization of MoSi_2/MoB composite coating on Mo substrate[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2014:384-388. |
[10] | Thomas Schambron;Liang Chen;Taliah Gooch .Effect of Mo Concentration on Dynamic Recrystallization Behavior of Low Carbon Microalloyed Steels[J].Steel Research International,2013(12):1191-1195. |
[11] | HABIB SAHLAOUI;HABIB SIDHOM .Experimental Investigation and Analytical Prediction of σ-Phase Precipitation in AISI 316L Austenitic Stainless Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2013(7):3077-3083. |
[12] | Joanna Michalska;Maria Sozanska .Qualitative and quantitative analysis of σ and x phase in 2205 duplex stainless steel[J].Materials Characterization,2006,56:355-362. |
[13] | Liu F;Hwang YH;Nam SW .The effect of post weld heat treatment on the creep-fatigue behavior of gas tungsten arc welded 308L stainless steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1-2):35-41. |
[14] | Chi-Shang Huang;Chia-Chang Shih .Effects of nitrogen and high temperature aging on σ phase precipitation of duplex stainless steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):66-75. |
[15] | Niraj Nayan;S. Y. S. Narayana Murty;Gotvind .OPTIMIZATION OF HOMOGENIZING MODE FOR ALUMINUM ALLOY AA7075 USING CALORIMETRIC AND MICROSTRUCTURAL STUDIES[J].Metal Science and Heat Treatment,2009(7/8):330-337. |
[16] | Semiatin S L;Kramb R C;Turner R E et al.Analysis of the homogenization of a nickel-base super alloy[J].Scripta Materialia,2004,491:51-52. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%