采用数值模拟方法研究了40°螺旋角时螺旋折流板换热器双螺旋和中间搭接两种折流板布置形式对壳程性能与螺旋流动的影响,并与30°和40°螺旋角时单螺旋连续搭接结构的进行了对比.结果表明,40°螺旋角时双螺旋和中间搭接结构会强化壳程流体的螺旋流动,使同流量下壳程换热系数与压降增加,但同压降下的换热系数显著下降且均低于30°螺旋角单螺旋连续搭接结构的换热系数.
参考文献
| [1] | Petr Stehlik;Vishwas V. Wadekar .Different strategies to improve industrial heat exchange[J].Heat Transfer Engineering,2002(6):36-48. |
| [2] | QIUWANG WANG;GUIDONG CHEN;QIUYANG CHEN;MIN ZENG .Review of Improvements on Shell-and-Tube Heat Exchangers With Helical Baffles[J].Heat Transfer Engineering,2010(10):836-853. |
| [3] | Nasr MRJ;Shafeghat A .Fluid flow analysis and extension of rapid design algorithm for helical baffle heat exchangers[J].Applied thermal engineering: Design, processes, equipment, economics,2008(11/12):1324-1332. |
| [4] | Jian-Fei Zhang;Ya-Ling He;Wen-Quan Tao .3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles - Part II: Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles[J].International Journal of Heat and Mass Transfer,2009(23/24):5381-5389. |
| [5] | Zhang, J.-F.;Li, B.;Huang, W.-J.;Lei, Y.-G.;He, Y.-L.;Tao, W.-Q. .Experimental performance comparison of shell-side heat transfer for shell-and-tube heat exchangers with middle-overlapped helical baffles and segmental baffles[J].Chemical Engineering Science,2009(8):1643-1653. |
| [6] | 汲水,杜文静,程林.连续螺旋折流板换热器壳侧传热与流动特性的数值研究[J].中国电机工程学报,2009(32):66-70. |
| [7] | 李斌,陶文铨,何雅玲.螺旋折流板换热器螺距计算的通用公式[J].化工学报,2007(03):587-590. |
| [8] | 王晨,桑芝富.单螺旋和双螺旋折流板换热器性能的研究[J].高校化学工程学报,2007(06):929-935. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%