欢迎登录材料期刊网

材料期刊网

高级检索

以端羧基丁腈橡胶作为改性剂对TGDDM环氧树脂进行增韧,并与2-乙基-4-甲基咪唑固化剂和KH550偶联剂混合,制备出TGDDM环氧胶粘剂。分别测试了环氧胶粘剂固化后的剪切拉伸强度、凝胶化时间、电学性能以及接触角,并计算了环氧胶粘剂的表观活化能、表面能和相对介电常数。当端羧基丁腈橡胶的用量为15 phr时,TGDDM环氧胶粘剂的拉伸剪切强度最大,达到27.8 MPa,并且具有良好的电气绝缘性能和疏水性。

A TGDDM epoxy adhesive was prepared by blending TGDDM epoxy resin modified by carbox-yl-terminated butadiene-acrylonitrile(CTBN), 2-ethyl-4-tetramethylimidazole curing agent and KH550 cou-pling agent. The tensile shear strength, gel time, electrical properties and contact angle of the cured ep-oxy adhesive were tested, and then the activation energy, surface energy and relative dielectric constant were calculated. The results show that when the CTBN dosage is 15 phr, the tensile shear strength of the TGDDM epoxy adhesive attains maximum 27.8 MPa, and the adhesive has good electrical insulating prop-erties and hydrophobicity.

参考文献

[1] 费斐,虞鑫海.TGDDM环氧树脂的研究进展[J].粘接,2009(09):68-72.
[2] 阎睿,虞鑫海,李恩,刘万章.新型环氧胶粘剂的制备及其性能研究[J].绝缘材料,2012(02):12-14,18.
[3] 李恩,虞鑫海,徐永芬,刘万章.高强度单组份环氧胶粘剂的制备及其性能研究[J].绝缘材料,2012(01):12-14.
[4] 费斐,虞鑫海,刘万章.耐高温单组分环氧胶粘剂的制备[J].粘接,2009(12):34-37.
[5] 吴敏,陈洪江,虞鑫海,徐永芬,刘万章.新型高强度单组分环氧树脂胶粘剂的研制[J].粘接,2009(09):54-57.
[6] Shanmugam Nagendiran;Muthukaruppan Alagar;Ian Hamerton .Octasilsesquioxane-reinforced DGEBA and TGDDM epoxy nanocomposites: Characterization of thermal, dielectric and morphological properties[J].Acta materialia,2010(9):3345-3356.
[7] 刘秀生,刘兰轩,李斌,汪洋,崔盼.丁腈橡胶增韧改性环氧树脂的研究[J].中国涂料,2010(08):31-35.
[8] Hitesh K Soni;Vithal S Patel;Ranjan G Patel .Effect of Fortifier on the Cure Kinetics and Thermal Stability of N,N,N',N'-tetraglycidyl Ether of 4,4'-diaminodiphenyl Methane Us-ing Amines as Curing Agents[J].Thermochimica Acta,1992,196(02):327-337.
[9] Stjohn N A;George G A .The Effect of Impurities on Gel Times for TGDDM Epoxy Resins Cured with DDS[J].High Performance Polymer,1993,5(01):21-36.
[10] 陈平,孙明,唐忠鹏,王秀杰,左芳.环氧树脂增韧技术研究进展及发展方向[J].纤维复合材料,2003(02):12-15.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%