以TiFe粉和蔗糖为原料,通过蔗糖的热分解碳化制备Ti-Fe-C系反应热喷涂复合粉末,利用普通氧乙炔火焰喷涂成功制备出TiC/Fe复合涂层.采用XRD、SEM和TEM等对喷涂粉末和涂层的组织结构、涂层中的TiC颗粒进行了分析.研究结果表明:TiC/Fe复合涂层主要由TiC颗粒均匀分布于Fe基体中的复合强化片层构成,片层中TiC颗粒呈球形或近球形,粒径约为50 nm;纳米级TiC颗粒增强的复合强化片层占涂层体积的60%以上.
In this paper, TiC/Fe composite coatings were synthesized and deposited by reactive flame spray,using a kind of Ti -Fe -C composite powder prepared by carbonizing the mixture of ferrotitanium and sucrose as precursor. XRD, SEM and TEM were employed to analyze the microstructures of the composite powder and the coatings. It is showed that the composite coatings are mainly composed of composite layers, in which the TiC particles are dispersed within the Fe-alloy matrix, and TiC particles in these layers are spherical or near-spherical with the size of 50 nm or so. The volume content of composite layers in the coating is above 60%.
参考文献
[1] | 周静,韦云隆,张隆平,吴护林.等离子喷涂耐磨涂层及热障涂层的新进展[J].表面技术,2001(02):23-25. |
[2] | 赵辉,王群,丁彰雄,张云乾.HVOF喷涂纳米结构WC-12Co涂层的组织结构分析[J].表面技术,2007(04):1-3,14. |
[3] | 陈煌,林新华,曾毅,丁传贤.热喷涂纳米陶瓷涂层研究进展[J].硅酸盐学报,2002(02):235-239. |
[4] | Lima RS.;Berndt CC.;Kucuk A. .Evaluation of microhardness and elastic modulus of thermally sprayed nanostructured zirconia coatings[J].Surface & Coatings Technology,2001(2/3):166-172. |
[5] | 刘慧渊,黄继华.以沥青为前驱体制备TiC/FeCrNi反应火焰喷涂复合涂层[J].稀有金属材料与工程,2006(07):1061-1064. |
[6] | 李博宇,董星龙,刘圆圆,杨明川,刘方军.等离子喷涂法纳米结构WC-12Co涂层的微结构与形成机理的研究[J].材料工程,2006(06):40-45. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%