欢迎登录材料期刊网

材料期刊网

高级检索

为实现聚能装药对混凝土介质的大破孔侵彻,采用数值模拟的方法,利用Autodyn-2D动力学软件,分别对3种装药结构的TC4钛合金射流侵彻高强度混凝土靶的过程进行仿真计算,并分析射流的成型及侵彻规律。研究表明:在炸高为2倍装药口径的条件下,单锥形罩射流的侵彻深度可达到6倍装药口径,亚半球罩的侵彻孔径可达到0.6倍装药口径以上;弧锥结合罩射流得到的侵彻孔道较好地综合了两种传统聚能装药结构的特点,能兼顾侵彻孔径和孔深的要求。

In order to realize the large hole penetration of the concrete medium by the shaped charge,numerical simulation method was adopted using the dynamic software Autodyn?2D. The different processes of TC4 titanium alloy jet of three kinds charging structure penetrating the high strength concrete targets were simulated and calculated respectively,and the law of forming and penetrating of jet was analyzed. Studies show that when the burst height is two times charge’s diameter,the penetration depth of the jet of cone liner can reach 6 times the diameter,the penetration hole of the jet of sub?hemisphere liner is larger than 0.6 times diameter. The penetrating hole of the jet of the arc?cone liner combines the advantages of two traditional structures of shaped charge,meeting the requirements of both diameter and depth of concrete crater at the same time.

参考文献

[1] 刘莹,曲周德,王本贤.钛合金TC4的研究开发与应用[J].兵器材料科学与工程,2005(01):47-50.
[2] 康彦龙,蒋建伟,王树有,门建兵.不同罩材聚能装药对多层介质侵彻的实验与数值模拟[J].高压物理学报,2012(05):487-493.
[3] 薛鑫莹,景涛,李国邓.聚能装药钛合金药型罩研究[J].弹箭与制导学报,2012(05):83-86.
[4] 王成,钱俊松,王万军.超聚能射流形成的数值模拟[C].北京力学会第20届学术年会论文集,2014:563-564.
[5] 张若棋,丁育青,汤文辉,冉宪文.混凝土HJC、RHT本构模型的失效强度参数[J].高压物理学报,2011(01):15-22.
[6] 张先锋,陈惠武.三种典型聚能射流侵彻靶板数值模拟[J].系统仿真学报,2007(19):4399-4401,4410.
[7] 齐振伟 .反机场跑道串联随进弹终点效应的实验研究与数值模拟[D].国防科学技术大学,2007.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%