基于转炉炼钢过程脱磷的热力学分析和计算,以控制转炉冶炼过程脱磷期温度为出发点,提出一种利用CO2气体代替部分O2进行吹炼的转炉炼钢新工艺,即COMI炼钢工艺。研究发现：COMI炼钢工艺能有效控制转炉熔池温度,降低半钢和一倒钢液磷含量,同时可有效减少炉渣铁损,为转炉高效脱磷提供了一种新思路。
Based on thermodynamic analysis and calculation of dephosphorization in converter steelmaking process,COMI steelmaking process,in which CO2 was used as a substitute for part O2 to control the temperature of dephosphorization,was presented.It is discovered that the bath temperature can be effectively controlled and phosphorus content of liquid steel is reduced by COMI steelmaking process.Moreover,iron losses of slag are lowered.The process will provide a new idea of converter dephosphorization with high efficiency.
参考文献
| [1] | 黄希祜.钢铁冶金原理[M].北京:冶金工业出版社,2006:370. |
| [2] | Malsuo T;Yamazaki I;Masuda S.Development of New Hot Metal Dephosphorization Process in Top and Bottom Blo-wing Converter[A].Detroit:ISS-AIME,1990:115. |
| [3] | Villarreal R R;Ramirez C R.Dephosphorization in Converter[A].Pittsburgh:ISS-AIME,1996:173. |
| [4] | 杨文远,郑丛杰,杨立红,陈华,崔健,许春雷,蒋晓放.大型转炉炼钢脱磷的研究[J].炼钢,2002(01):30-34. |
| [5] | 王金平,吴健鹏,李小明,徐永清.转炉高碳低磷钢工艺研究与应用[J].炼钢,2007(02):7-10,30. |
| [6] | 野村宏之;森一美 .高炭素领域における溶鉄の脱炭反応機構に関する研究[J].铁と钢,1971,57(09):1468. |
| [7] | 野村宏之;森一美 .低炭素领域における溶鉄の脱炭反応機構に関する研究[J].铁と钢,1972,58(01):30. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%