通过球形压头纳米压痕蠕变实验研究了加载速率对{(Ce0.2La0.8)..78Ni0.22}75Al25块体金属玻璃室温蠕变变形的影响.结果表明:该Ce(La)基块体金属玻璃的蠕变变形量随着加载速率的增加而增大.此外,根据经验幂律函数计算出了材料室温蠕变应变速率敏感系数m,当加载速率从0.8 mN/s增大到80 mN/s时,m从0.028逐渐增长到0.079,显示出显著的压痕加载速率敏感性.研究表明,这是由于高加载速率条件下,压头周围材料内部多重剪切带被激活并扩展导致材料软化引起的.另外,这些m值都远小于1,表明材料在室温下的纳米压痕蠕变行为是非均匀的.
参考文献
[1] | A.Inoue.Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta materialia,20001(1):279-306. |
[2] | Wang WH;Dong C;Shek CH.Bulk metallic glasses[J].Materials Science & Engineering, R. Reports: A Review Journal,20042/3(2/3):45-89. |
[3] | Zhilin Long;Yong Shao;Guoqiang Xie.Enhanced soft-magnetic and corrosion properties of Fe-based bulk glassy alloys with improved plasticity through the addition of Cr[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20081/2(1/2):52-59. |
[4] | C.A. Schuh;T.G. Nieh.A nanoindentation study of serrated flow in bulk metallic glasses[J].Acta materialia,20031(1):87-99. |
[5] | Y.J. Huang;J. Shen;Y.L. Chiu.Indentation creep of an Fe-based bulk metallic glass[J].Intermetallics,20094(4):190-194. |
[6] | Huang, YJ;Chiu, YL;Shen, J;Chen, JJJ;Sun, JF.Indentation creep of a Ti-based metallic glass[J].Journal of Materials Research,20093(3):993-997. |
[7] | Byung-Gil Yoo;Jun-Hak Oh;Yong-Jae Kim;Kyoung-Won Park;Jae-Chul Lee;Jae-il Jang.Nanoindentation analysis of time-dependent deformation in as-cast and annealed CueZr bulk metallic glass[J].Intermetallics,201010(10):1898-1901. |
[8] | Li JCM..Impression creep and other localized tests[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20021-2 Special Issue SI(1-2 Special Issue SI):23-42. |
[9] | B.N.Lucas;W.C.Oliver.Indentation power-law creep of high-purity indium[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,19993(3):601-610. |
[10] | W. Dmowski;T. Iwashita;C.-P. Chuang;J. Aimer;T. Egami.Elastic Heterogeneity in Metallic Glasses[J].Physical review letters,201020(20):205502.1-205502.4. |
[11] | 付涛;宋华锋;贾元波;王庆.Cu46Zr47-xAl7TiX(x=O,1.5)非晶合金晶化动力学研究[J].上海金属,2011(5):19-22,26. |
[12] | Ma ZS;Long SG;Pan Y;Zhou YC.Loading rate sensitivity of nanoindentation creep in polycrystalline Ni films[J].Journal of Materials Science,200817(17):5952-5955. |
[13] | Bingchen Wei;Taihua Zhang;Weihuo Li.Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature[J].Materials transactions,200512(12):2959-2962. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%